MOTOR MANUFACTURER · Shanxi, CHINA

CRRC Yongji Electric Co., Ltd.

Yongji's published YJ150A metro motor, YJ286B locomotive motor and doubly fed wind generator serve different systems. Choose the application first, then define converter, cooling, mechanical and test interfaces before asking for a comparable quotation.

LocationShanxi, China

CRRC YONGJI · SYSTEM-LEVEL ELECTRIC DRIVES

CRRC Yongji Electric: rail traction, wind generator and drilling-drive sourcing

01 / VEHICLE PLATFORM FIRST

A metro replacement and a direct-drive locomotive need different evidence

YJ150A: metro VVVF drive and self-ventilation

Yongji's YJ150A page identifies a voltage-source-inverter-fed asynchronous traction motor for metro use. It lists 180kW rated power, 1100V rated voltage, 4779r/min maximum speed, self-ventilation, an hourly duty designation and 555kg mass. Those are values for that published model, not a blanket specification for every urban-rail motor. A replacement must fit the original vehicle's inverter, gear drive, suspension and thermal duty.

Confirm before ordering Provide the vehicle class, old motor and converter codes, gear ratio, mounting drawing, axle load, acceleration/braking cycle and cooling-air path. Ask for the current YJ150A revision drawing, insulation and thermal limits, complete torque-speed envelope and tests at the specified duty.

YJ286B: permanent-magnet locomotive direct drive

The official YJ286B sheet describes a 160km/h locomotive application that replaces an asynchronous motor plus gearbox with permanent-magnet direct drive. Its stated rated point is 1225kW, 1660V, 477A and 706r/min; rated torque is 33,164N·m while 42,000N·m is a separate maximum. It weighs 3400kg. Do not transfer these values to a metro bogie or treat the maximum torque as a continuous rating.

Confirm before ordering Share the locomotive platform, axle torque-speed demand, converter/DC-link and feedback architecture, wheel/axle interface, cooling, vibration and maintainability requirements. Obtain a project-specific motor-converter matching document and type/routine-test scope.

02 / GENERATOR AND TURBINE

Keep the doubly fed generator, converter and cooling loop together

One documented 2MW-platform example

Yongji's older air-water-cooled doubly fed sheet describes a nacelle-mounted generator geared to a variable-speed 2MW turbine. The sheet lists a 2150kW generator rated point, 1755r/min, 50Hz, 4 poles and 690V/312V stator/rotor rated voltages. These are one published design point, not a promise of present availability or suitability for a different turbine. The stator is grid-connected and the rotor uses a four-quadrant converter, so the converter and protection study are part of the purchase.

Confirm before ordering Provide gearbox speed range, converter rating and rotor interface, grid code, site altitude/temperature, nacelle envelope, coolant supply, slip-ring service access and lightning/protection requirements. Request the current drawing and tested efficiency/thermal map for the quoted revision.

The 35kV announcement is a separate platform

The company later announced a 35kV high-voltage doubly fed wind-generator technology and described type-testing and insulation/cooling work. Its public announcement does not publish a complete orderable model matrix, so it cannot be substituted into the older 690V stator / 312V rotor example. Any claimed certificate must be checked against the exact offered type, issuing body and current scope.

Confirm before ordering Ask whether the proposed system needs a nacelle transformer, what grid connection is intended, and how the insulation, cooling and converter design is validated at the chosen voltage.

03 / RIG DUTY IS NOT RAIL DUTY

Define pump and rig transients before discussing a drilling motor

What part of the rig is driven?

The company's oil-drilling portfolio separately describes DC and variable-frequency AC motor families. A more recent company announcement concerns a 1200kW permanent-magnet motor developed for a drilling pump. Neither makes a rail traction unit suitable for a pump by default. Identify drawworks, mud pump or another load, then state torque at start, overload duration, continuous speed, cooling medium and ambient conditions.

Which evidence belongs in the quotation?

Request the exact drive motor and converter combination, duty-cycle and thermal test basis, enclosure/environment options, service access, protection and commissioning plan. The maker's reported grade-1 energy-efficiency certification concerns its announced pump-drive design; it is not proof that every oilfield or rail product has the same approval.

04 / ENGINEERING ACCEPTANCE

Order a defined electromechanical system, not an undifferentiated motor family

The company identity and scope are clear

Yongji Electric identifies itself as a CRRC subsidiary with motor, converter, power-module and system-integration platforms. Its own distinct model pages provide the numbers above, while an independent rail-industry exhibitor catalogue also names the legal company and its traction-system business. These sources establish supplier context; they do not replace a project-specific approved drawing.

The acceptance file must match the physical unit

For a rail motor, approve the vehicle interface, torque-speed curve, converter controls, cooling and vibration/insulation tests. For a wind generator, approve gearbox and grid interfaces, rotor-converter protection, coolant flow and site-environment tests. For a drilling drive, approve pump load transients, drive protection and thermal duty. Record serial-number-linked routine tests and change control before dispatch.

Company information

Company name
CRRC Yongji Electric Co., Ltd.
Chinese registered name
中车永济电机有限公司
Region
Shanxi, China
Record updated
2026-10-07

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail