ANP: GOST-market three-phase induction motor
The manufacturer's ANP page identifies a three-phase GOST-oriented range for fans, pumps, compressors and other machinery. It separates cast-iron frames H56–355 with a stated family power range of 0.75–315 kW from aluminium frames H56–132 with 0.18–11 kW. The page lists 50 Hz, 220/380 V or 380/660 V options, IP55, F insulation, IC411 self-fan cooling and S1 continuous duty as standard family characteristics. The top power is not an aluminium-frame rating and the voltage connection must be taken from the chosen winding.
Confirm before ordering Provide the required GOST mounting/dimension convention, selected frame material and size, driven load, kW and speed, supply and connection, shaft/flange, terminal-box orientation and ambient. Ask for the exact ANP code, IEC/GOST interchangeability drawing where relevant, nameplate, efficiency/test sheet and availability of optional heater or thermal protection.
View ANP GOST three-phase induction motors →
MVF: aluminium inverter-duty route
The company's MVF page describes a three-phase aluminium inverter motor with a separate forced-cooling fan, a published 20–100 Hz motor frequency range and 400 V rated supply. That separate fan matters when the driven shaft slows, because shaft-mounted cooling alone may fall with speed. The short public page does not supply a frame-by-frame torque envelope, fan supply, thermal limit or approved converter pairing.
Confirm before ordering State base and minimum/maximum process speed, constant- or variable-torque load, duration at low speed, converter output and cable length, fan auxiliary supply, bearing and insulation needs, mounting and ambient. Request the selected MVF's torque-speed/temperature curves, cooling fan wiring and tested converter configuration.
View MVF aluminium variable-frequency induction motor →
Other Dayou programmes are separate procurement scopes
The same company catalogue also groups IEC induction, brake, hydraulic, compressor, new-energy-vehicle and rolling-door motors. These are not interchangeable ANP or MVF variants. The buyer should name the actual equipment and application rather than assuming that one manufacturer's umbrella range grants all features to one offered motor.
Confirm before ordering If the project needs a brake, vehicle traction, door drive or hydraulic assembly, request that family's dedicated model, controls, interface and approvals rather than adapting an ANP or MVF quote by name.