MOTOR MANUFACTURER · Liaoning, CHINA

Shenyang Electric Machine Manufacturing Co., Ltd.

Shenyang's YXKS water-cooled cage, YRKK wound-rotor and TDMK synchronous drives solve different starting and plant-integration needs. Define the load, cooling and controls before comparing quotations.

LocationLiaoning, China

SHENYANG ELECTRIC MACHINE · LARGE INDUSTRIAL DRIVES

Shenyang Electric Machine: cooling, rotor and excitation choices for large drives

01 / START WITH THE LOAD

Three published drive families are not interchangeable

YXKS: cage rotor with air-water cooling

The official YXKS family page lists a cage-rotor induction design, IC81W or IC86W cooling, IMB3 mounting, and rolling or sleeve-bearing options. Its H355–H1120 and 185kW–20MW figures are family bounds, while 380V, 3kV, 6kV and 10kV are alternatives; the page does not supply a complete frame-by-frame combination table. The choice matters for a plant that can maintain a dependable cooling-water circuit and its leak/protection controls.

Confirm before ordering Specify the pump, compressor or fan load point; starting method; water inlet conditions, quality, pressure and failure interlock; available voltage; bearing preference and foundation. Request exact frame dimensions, losses, thermal and vibration test data.

YRKK: wound rotor and external starting circuit

Shenyang lists YRKK as a wound-rotor motor with IC611/IC616 cooling options and rolling/plain-bearing choices. Its catalogue span again reaches H355–H1120 and 185kW–20MW, but those maxima cannot be assigned to an arbitrary mine or mill drive. Unlike a cage rotor, the rotor terminals and external resistance or control equipment form part of the starting design.

Confirm before ordering Send inertia, locked-rotor and acceleration requirements, starts per hour, rotor-resistor/control architecture and allowed thermal cycle. Agree on brush/slip-ring access, rotor-circuit protection and the motor-plus-starter acceptance test.

TDMK: synchronous machine with static excitation

The manufacturer's TDMK page describes a brush-excited synchronous family for mining and building-materials duty, static thyristor excitation, pedestal plain bearings and IC37/IC86W cooling alternatives. It lists 250kW–7.1MW, 3/6/10kV and 0.9 leading power factor at family level. A synchronous drive adds field/excitation controls and pull-in behaviour; it cannot be selected by copying a YRKK kW and shaft height.

Confirm before ordering For a mill or crusher, give driven inertia and speed, process restart sequence, network short-circuit capacity, desired reactive-power operating point and excitation cabinet interface. Request start/pull-in calculations, field-loss protection and complete package drawings.

02 / THE PARTS THAT CAUSE REWORK

Electrical supply, cooling and civil works decide the project

Supply and protection are configuration-specific

The YXKS and YRKK pages both list several voltages and IP options; the TDMK page lists a different voltage set and IP44/IP54. These are selection menus, not one ready-made universal unit. Obtain the final voltage, short-circuit/earthing study, terminal-box orientation and protection settings for the offered design. Hazardous-area use needs a separately matched protected product and certificate, not an IP number alone.

Cooling and bearings must fit the site

Water-assisted IC81W/IC86W on YXKS, air-air IC611/IC616 on YRKK and IC37/IC86W alternatives on TDMK imply different utility, duct, heat-exchanger and maintenance plans. Rolling bearings and plain bearings have distinct lubrication and foundation demands. Request heat-rejection figures and utility limits for the selected build, not the catalogue family.

03 / ONE COMPARABLE PACKAGE

Send a duty sheet and ask for a complete drive package

What should be in the buyer's first brief?

Give the driven equipment and actual load-speed curve, inertia and starts, site altitude/ambient, grid voltage/frequency and disturbance limits, enclosure/hazard classification, mounting and shaft drawing, cooling utilities and allowable downtime. A retrofit also needs the old motor plate, foundation and starter/converter records.

What should appear on the supplier's offer?

Require a fully coded motor/rotor/excitation or starter configuration, rated electrical point and efficiency basis, starting and thermal studies, cooling/bearing schedule, outline and terminal drawings, applicable certificates at the exact design scope, and routine/type-test plan. Compare service access and lifetime maintenance obligations alongside price.

How should acceptance be documented?

Witness electrical and insulation tests, loss/temperature-rise evidence at the agreed method, vibration/balance, cooling-water or ventilation interlocks, bearing behaviour and the actual starting sequence. For YRKK include rotor circuit; for TDMK include excitation and field-loss protection. Tie test reports and as-built drawings to serial numbers.

04 / SCOPE OF PUBLIC EVIDENCE

A series range is a route to a specification, not the specification

Company identity and engineering scope

Shenyang Electric Machine's official catalogue separates general-purpose, engineered and heavy-duty products. A Shenyang municipal public list independently names the legal company. The published company news describes a 10MW-class test centre, but that statement does not prove a specific buyer's motor has been tested or certified there.

What the product pages do not establish

YXKS, YRKK and TDMK pages provide family-level frame, power, voltage and cooling alternatives without a complete paired model table. This profile does not combine their extremes into a fictional order code or claim that the family's full span is continuously available. Exact performance, efficiency, certification and site fit remain quotation-stage evidence.

Company information

Company name
Shenyang Electric Machine Manufacturing Co., Ltd.
Chinese registered name
沈阳电机制造有限公司
Region
Liaoning, China
Record updated
2026-10-07

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail