Y2 three-phase motor: a general machinery replacement
The manufacturer publishes a separate Y2 enclosed fan-cooled induction family, with an introductory H63–H355 frame range, IP54 and class F insulation. These are family descriptors, not a complete motor order code or a present-day efficiency class. The general-purpose description excludes flammable, explosive and corrosive gas service.
Confirm before ordering Supply the old nameplate, frame and shaft drawing, voltage/frequency, kW and rpm, mounting, start method, duty and cooling clearance. Ask for the selected Y2 variant's current rated sheet, dimensions and destination-market compliance evidence.
FJJ fire-shutter operator: compare the output and the whole door
An official FJJ850-3P(RN) page shows 850 N·m output torque and 3.9 rpm, a 380 V / 0.55 kW motor input, 11-drum-turn limit travel and a 12A-1 chain. Its catalogue title appends a 1500 kg door figure. These values describe an integrated operator and its application context; 850 N·m is not the 0.55 kW motor's own shaft-torque rating, and 1500 kg is not motor mass or electrical output.
Confirm before ordering Provide shutter curtain mass and dimensions, barrel diameter, gear/chain layout, mounting side, limit positions, release/fail-safe behavior, fire-control interface, power supply and opening/closing cycle. Request assembly drawing, brake/limit/controller scope and test documents for the offered door configuration.
FKB protected opener: verify the classification and accessories
The manufacturer's FKB55 page is a separate explosion-protected opener entry. Its published 350 N·m, 6 rpm, 380 V and 0.55 kW figures are operator-level and electrical values for that listing, not a certificate scope. The visible public page does not itself establish protection marking and issuer-validated approval for a specific gas or dust zone.
Confirm before ordering State the hazardous-area classification, gas/dust group, ambient, door load and operating cycle. Ask for the exact FKB configuration, motor and limit-switch markings, protected controller/cabling scope, current certificates and an installation drawing.