MOTOR MANUFACTURER · Zhejiang, CHINA

YouTuo

YouTuo's M29, M36 and M40 catalogue entries point to three different machines: a wool clipper, a pump or horse clipper, and a fruit-harvesting tool. Each can stall, cool and load its motor differently. Use the published family ranges to choose which engineering questions to ask, then obtain the exact winding and controller match.

LocationZhejiang, China
Published catalogue3 product series
Motor families1 represented

WUYI · COMPACT EQUIPMENT DRIVES

YouTuo compact BLDC motors: clipper, pump and harvester briefs

Explore the published range ↓

01 / THE LOAD SHAPE MATTERS

Three compact platforms, three operating problems

M29 wool clipper: cutting transients and hand-held packaging

The official M29 page identifies a 29-size platform for wool shears and lists 12–36 V, 100–300 W and 10,000–30,000 rpm as family ranges. Those extrema are not one build's guaranteed operating point. Cutting torque spikes, blocked blades and housing airflow can dominate a hand-held tool even when a bench speed is attractive. Confirm whether the supplier is quoting the bare motor, geared spindle or assembled drive.

Confirm before ordering Send blade/cutter torque trace, reduction ratio, handle envelope, allowable mass and vibration, battery voltage under load, duty/rest cycle and stall event. Ask for the exact winding's torque-speed curve, controller current limit, temperature-rise test and shaft/mount drawing.

View M29 inner-rotor brushless motor for clippers →

M36 pump or horse clipper: do not share one test plan

The manufacturer's M36 record names both water pumps and horse clippers and presents 12–24 V, 100–400 W and 10,000–35,000 rpm as family ranges. A centrifugal pump imposes a continuous hydraulic operating point and liquid-isolation requirements; a clipper imposes blade impacts, grip noise and intermittent handling. One motor diameter does not prove either application is qualified.

Confirm before ordering For a pump, provide flow-head curve, fluid temperature, seal arrangement, run hours and dry-run protection. For a clipper, provide blade load, gear reduction, duty, washdown and hand-arm vibration limits. For both, request the exact motor/controller revision, rated speed under load and endurance test.

View M36 compact inner-rotor brushless motor →

M40 fruit harvester: size for repeated impacts

The official M40 page associates the 40-size series with fruit-harvesting equipment and lists 12–24 V, 200–500 W and 10,000–35,000 rpm as catalogue intervals. A shaker or picker may experience rapid acceleration, branch contact and repeated reversals. The motor must be assessed with the gearbox/eccentric and tool, not selected solely because the family's top wattage exceeds a competing product.

Confirm before ordering Provide eccentric mass or cutter mechanism, stroke and impact schedule, gearbox efficiency, battery sag, overload and shock limits, outdoor ingress and thermal cycle. Request torque-current and efficiency maps, gearbox interface, protection strategy and field duty validation.

View M40 brushless motor for fruit-harvesting equipment →

02 / KEEP FAMILY DATA IN ITS PLACE

The catalogue gives a starting envelope, not a purchasable matrix

The same range has many electrical builds

M29, M36 and M40 pages each publish intervals for stack length, voltage, power and speed, with incomplete structure fields on the site. No row-by-row winding code links the extreme values. Do not quote 36 V with M29's highest speed and power, or 24 V with M40's maximums, as a confirmed single motor. Require a current drawing and signed data sheet for the actual ordering code.

Company identity has a separate public trace

The maker publishes its Wuyi/Tongqin address and motor catalogue. A Zhejiang public-service attachment independently lists the Chinese company name in a local utility record. That is useful for identity cross-checking, but it is not a product certificate, a site audit or proof that an individual catalogue photograph depicts the offered revision.

Controller and housing are part of the delivered performance

The public entries do not supply a complete efficiency map, phase resistance, Hall/encoder interface, thermal class, shaft bearing load or matched controller firmware. An OEM should test the motor inside the final housing and define who owns low-voltage cutoff, stall protection, speed regulation and replacement-part compatibility.

03 / TURN A FAMILY INTO A TESTABLE SAMPLE

Close the gaps before approving tooling or a pilot lot

What should the OEM send?

Provide the finished machine, target annual volume, working voltage and battery sag, full load trace rather than only no-load rpm, envelope and mount, shaft and gear arrangement, ambient and ingress, noise/vibration target, duty cycle, stall frequency and test conditions. State whether a controller and gearbox are included.

What should be returned?

Request exact motor/winding and controller codes, sample drawing, torque-speed-current curve at defined temperature, continuous/intermittent limits, shaft/bearing loads, insulation and ingress details, end-of-line test points, endurance plan, revision control and a specific quotation. Compare candidates at the same machine-level duty point.

Published motor range

3 series

Company information

Company name
Zhejiang YouTuo Motor Co., Ltd.
Chinese registered name
浙江优拓电机有限公司
Region
Zhejiang, China
Record updated
2026-10-07

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail