
Explosion-proof motors
YFB5 dust explosion-proof three-phase motor
ANHUI WANNAN ELECTRIC MACHINE CO.,LTD.- Power
- 0.12–315 kW
- Voltage
- 380 V

Manufacturer catalogue image · Series illustration

Catalogue series · Exact configuration and availability confirmed by the manufacturer.
DAGAO’s vertical YBX3 page combines a family rating table with a frame-dependent mounting chart. A rating in the electrical table is only the first selection step: the mounting chart becomes narrower for larger frames, and the exact flange, shaft orientation and protection variant still need to match the machine.
Selected entries from the installation chart are shown below. These are catalogue options to resolve in a quotation, not confirmation that every power, pole count and protection variant is available in every listed arrangement.
B5, B14, B35, V1, V3, V18, V35, V37 among the listed options. Name the required code and obtain its actual flange drawing; a flange photograph cannot identify the complete interface.
B5, B35, V1, V3, V35, V37 among the listed options. Do not carry the smaller-frame B14 option into this group without a separately confirmed drawing.
B3, B5, B35, V1. The chart also places frame 160 in the preceding group. Resolve that overlap for the actual 160-frame variant rather than choosing the more permissive row.
B3, B35, V1. Confirm a specifically listed configuration; the smaller-frame menu cannot be extended to this group.
The YBX3-90S-4 row lists 1.1 kW, 1400 rpm, 84.1% efficiency and a 0.76 power factor. Its paired currents are 2.65/1.53 A under the 380/660 V supply headings. The starting-current ratio is 6.6. Select the current that corresponds to the ordered voltage and connection; the pair is not a minimum-to-maximum current range.
The illustration shows a flange arrangement, but it does not dimension the register, bolt circle, shaft extension or allowable axial load. Request these for the selected mounting code, along with shaft orientation and the bearing arrangement. If the driven equipment applies thrust, include its magnitude, direction and operating cycle in the enquiry.
The page combines IIC T4 and dust-protection wording. Provide the site’s required marking and environment, then request the exact motor’s certificate and matching nameplate. The technical panel lists IP55 or IP65, S1 duty and IC411 cooling; an enclosure IP rating alone does not establish the appropriate hazardous-area variant.
The technical panel lists 50 Hz, 380 V, 660 V and 380/660 V versions, with other supplies by order. It gives a factory-use ambient range of −15 to 40°C and altitude up to 1000 m. State any conditions outside those figures, rather than assuming the catalogue output remains available without a revised rating.
Request the dimensioned flange and shaft drawing, cable-entry positions and terminal-box clearance for the actual order code. Return the driven machine’s interface drawing with the enquiry. This lets the supplier resolve the mounting-chart overlap and the electrical/protection variant together before the purchase is approved.
CATALOGUE OVERVIEW
DAGAO’s vertical YBX3 listing links a family performance table that separates two-, four-, six-, eight- and ten-pole groups. The table includes a YBX3-90S-4 row at 1.1 kW and 1400 rpm and lists 380 V/380–660 V supply headings. These are YBX3 rating rows; the vertical flange and shaft arrangement must be confirmed separately. The page combines gas and dust protection wording, so use the exact variant’s marking and certificate for hazardous-area selection.
The attached table covers the YBX3 family. It does not prove every rating is available with the displayed vertical mounting or every protection marking.
Model / series reference: YBX3
Specifications describe a series range; confirm which ratings apply together to the quoted model.
Confirm mounting and shaft dimensions against the drawing for the quoted configuration.
Keep your sourcing team on the same page.
We use cookies to keep this site working and measure website usage. Cookie & privacy details