FYQG-112 water-jet and air-jet loom motor

Manufacturer catalogue image · Series illustration

Application-specific motors

FYQG-112 water-jet and air-jet loom motor

Power
1.5–2.8 kW
Poles
4
Application
Water-jet and air-jet textile machinery
Product Type
FYQG-112 water-jet and air-jet loom motor

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

Read the FYQG112M-4 nameplate before matching a loom motor

The FYQG-112 range contains five power choices. Guofang’s published nameplate photograph identifies one of them precisely: a 2.2 kW FYQG112M-4. The photograph below is a useful reference when the series description and an installed motor do not agree.

The illustrated motor is 1430 rpm, not the 1450 rpm series description

Guofang FYQG112M-4 nameplate showing 2.2 kW, 380 V, 50 Hz, 4.5 A and 1430 rpm
Manufacturer catalogue photograph of one FYQG112M-4. Tap the photograph to inspect it at full size.

The plate reads FYQG112M-4, 2.2 kW (3 HP), 380 V, 50 Hz, 4.5 A and 1430 rpm. In contrast, the product description lists 1450 rpm alongside the five four-pole power options: 1.5, 1.8, 2.2, 2.6 and 2.8 kW. For the illustrated 2.2 kW motor, the photographed plate is the specific rating; the text does not establish 1450 rpm for that same unit.

That distinction matters on a belt-driven loom. With unchanged pulley diameters, transmission speed follows actual motor speed. Using 1430 instead of 1450 rpm in the ratio gives a difference of about 1.4%. This is a calculation comparing the two published speeds, not a measured reduction in cloth output or a reason to alter the loom’s pulleys. The replacement must first be identified by its own rated speed.

The connection panel shows a 380 V star connection. It does not show a 380 V delta running rating. A buyer replacing a motor served by a star-delta starter therefore has an unresolved winding match; the existence of six terminal labels on this plate does not resolve it. The catalogue’s custom 415 V/50 Hz and 380 V/60 Hz versions have to be treated as other configurations, not relabelled copies of this plate.

The two bearing entries are also different: 308 ZZ on the load side and 306 ZZ on the opposite side. Those are useful markings to compare with the installed assembly during a parts enquiry. They do not establish the shaft diameter, key or foot-hole spacing: the 112 frame designation and this photograph contain no dimensioned mounting drawing.

Finally, the plate specifies IP44, class F insulation and IC411 cooling. “Water-jet loom motor” names its application; it does not establish a washdown enclosure rating. The photograph records the marked configuration without supplying spray-exposure limits or a loom start/stop duty. Those missing application details cannot be inferred from the 2.2 kW value.

CATALOGUE OVERVIEW

About this motor series

Guofang makes the FYQG-112 four-pole motor range for water-jet and air-jet textile looms. The manufacturer publishes several power variants and a separate FYQG112M-4 nameplate photograph. This page uses that photographed unit to distinguish a concrete motor rating from the broader range description.

Model / series reference: FYQG-112

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Power
1.5–2.8 kW
Poles
4
Application
Water-jet and air-jet textile machinery
Product Type
FYQG-112 water-jet and air-jet loom motor
Output Options
1.5 / 1.8 / 2.2 / 2.6 / 2.8 kW
Catalogue Scope
Manufacturer model or series
Rated Speed At 50 Hz
1430 rpm on illustrated FYQG112M-4 plate; series text states 1450 rpm
Customized Supply Options
415 V / 50 Hz; 380 V / 60 Hz
Voltage
Confirm supply
Speed
Model dependent
Manufacturer
Guofang Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail