
AC induction motors
Y2 three-phase induction motor
Hangzhou Lixin Motor Co., Ltd.- Power
- 0.18–315 kW
- Voltage
- 380 V

Manufacturer catalogue image · Series illustration

Catalogue series · Exact configuration and availability confirmed by the manufacturer.
For a 22 kW Lixin motor, the shared YE4/YE5 table points to 180M at 3,000 rpm synchronous speed, 180L at 1,500 rpm, and 200L2 at 1,000 rpm. A 22 kW replacement therefore starts with the speed requirement, not a single frame size. The table does not separate YE4 from YE5 performance.
Transcribed from Lixin’s undated online YE4/YE5 catalogue, checked 2026-11-04. Every number below is output power in kW; column headings are synchronous speed, not measured shaft speed. A dash means that the catalogue cell is blank or marked with a dash, not a zero-power motor.

| Catalogue frame | 3,000 rpm · kW | 1,500 rpm · kW | 1,000 rpm · kW |
|---|---|---|---|
| 90S | 1.5 | 1.1 | 0.75 |
| 112M | 4 | 4 | 2.2 |
| 160L | 18.5 | 15 | 11 |
| 180M | 22 | 18.5 | — |
| 180L | — | 22 | 15 |
| 200L2 | 37 | 30 | 22 |
| 225M | 45 | 45 | 30 |
| 315L2 | 200 | 200 | 132 |
| 355L | 315 | 315 | 250 |
| 3552 | 375 | 375 | 315 |
A machine specified around the catalogue’s 1,500 rpm synchronous-speed column reaches 22 kW at frame 180L. The 180M row in that same column is 18.5 kW. If the existing installation is labelled only ‘180 frame’, that description is too short to select between them: the M/L reference is part of the choice.
In the 1,000 rpm column, 22 kW appears at 200L2. Moving to that slower column changes the frame reference as well as speed. For a replacement, use the installed motor’s rated shaft speed and dimensioned outline to establish the required option; the shared table supplies neither rated rpm nor shaft and flange dimensions.
At the large end, the 3552 row lists 375 kW in the 3,000 and 1,500 rpm columns, but 315 kW in the 1,000 rpm column. The headline maximum of 375 kW cannot be carried across all three columns.

Lixin describes YE4 as Chinese efficiency grade 2 and YE5 as grade 1, and uses ‘IE4, 5’ in the same product page. No model-by-model efficiency percentages, test report numbers or separate YE4/YE5 performance tables accompany the frame table. It is enough to identify two marketed series, but not to calculate their energy-cost difference.
The page also uses both ‘GB18613-2020’ and ‘GB/T18163-2020’, with a further ‘GB/18163-2020’ spelling in its detail section. These are the source’s different strings; they have not been silently unified into a verified conformity claim.
For an IEC-based purchase, specify the edition and require the selected series, output, pole count, voltage and frequency on the efficiency sheet. IEC 60034-30-1:2025 covers efficiency classes for line-operated AC motors and introduces IE5 limits. Its existence does not certify a particular Lixin motor. An efficiency comparison needs numerical rated efficiency for both offered motors at matching conditions.

The manufacturer lists continuous duty S1, IC411 cooling, IP55 enclosure, −15 °C to +40 °C ambient and altitude no higher than 1,000 m. These are the shared catalogue conditions; no 60 Hz performance table is supplied on the page.
Its connection rule is star at 3 kW and below, delta above 3 kW. That describes the listed 380 V range; it does not establish a second nameplate voltage or authorize star–delta starting for every size. The offered motor’s winding voltage and terminal diagram must match the site supply and starting arrangement.
A useful quotation for this range identifies YE4 or YE5, the table frame reference, output and required rated shaft speed, then supplies the mounting drawing and model-specific efficiency sheet. That resolves the two gaps in the shared catalogue: whether the motor fits the machine and whether the quoted series meets the stated efficiency requirement.
CATALOGUE OVERVIEW
Hangzhou Lixin’s shared YE4/YE5 range lists 0.75–375 kW frame-and-speed combinations for a standard 380 V, 50 Hz supply. Select the required speed column and complete frame reference before comparing the two series.
Model / series reference: YE4
Specifications describe a series range; confirm which ratings apply together to the quoted model.
Confirm mounting and shaft dimensions against the drawing for the quoted configuration.
Keep your sourcing team on the same page.
We use cookies to keep this site working and measure website usage. Cookie & privacy details