MOTOR MANUFACTURER · Zhejiang, CHINA

Hangzhou Lixin

Hangzhou Lixin Motor's public catalogue spans ordinary three-phase induction motors, high-efficiency low-voltage families and box-frame high-voltage YKK motors. The selection task changes sharply between a direct Y2 replacement, a documented YE4/YE5 efficiency upgrade and a 6 or 10 kV plant drive. A buyer should start with the existing electrical system, load and physical envelope, then request a specific model sheet. The public pages mix older efficiency references, broad marketing and detailed tables; this profile treats those sources as starting points, not current approval of a quoted unit.

LocationZhejiang, China
Published catalogue4 product series
Motor families1 represented

HANGZHOU LIXIN · FROM PLANT REPLACEMENT TO HIGH VOLTAGE

Hangzhou Lixin: compare low-voltage efficiency and 6/10 kV drive paths

Explore the published range ↓

01 / MATCH THE SUPPLY AND DUTY

Choose the voltage class before discussing efficiency or frame size

Y2 for an ordinary low-voltage replacement

Lixin describes Y2 as a general-purpose, enclosed fan-cooled squirrel-cage series for machinery such as pumps, fans and compressors in non-explosive, non-corrosive locations. The official page specifies 380 V/50 Hz baseline, S1 continuous duty, F insulation, IP54/IP55 alternatives and IC411 cooling, then provides extensive historical model tables. It also uses an older EFF2 label; neither that label nor a table row establishes compliance with today's destination-market efficiency rule.

Confirm before ordering Send the existing nameplate, frame and mounting drawing, shaft/coupling dimensions, pump or fan curve, supply, starting method, ambient and desired efficiency class. Ask for the current exact-model sheet and test report before selecting a Y2 replacement or claiming an energy saving.

View Y2 three-phase induction motor →

YE4/YE5 when verified efficiency is the purchase driver

The maker separately markets YE4 and YE5 higher-efficiency induction families and gives a 380 V/50 Hz, IC411, S1 baseline on the combined page. The text refers both to GB 18613-2020 and inconsistent 'GB/T18163-2020' wording, while also mixing IE and domestic grade language. Treat the combined page as a catalogue route; do not infer a certified efficiency for a particular pole, kW, voltage or country from its heading.

Confirm before ordering Ask for the offered full model code, rated efficiency and loss-test method at the ordered voltage/frequency, current applicable standard, laboratory report, price premium and annual operating hours. Compare lifetime energy using the real load factor and duty, not only nameplate efficiency.

View YE4/YE5 high-efficiency induction motor →

YKK at 6 kV or 10 kV for a high-voltage plant drive

The YKK pages describe enclosed box-frame squirrel-cage motors with a top air-to-air cooler, F insulation, S1 duty, IC611 cooling, IMB3 mounting and IP44/IP54 choices. The 6 kV and 10 kV pages have separate voltage classes and model tables. Their repeated process claims do not establish an individual rotor, bearing or insulation configuration. One 6 kV table even puts a 750-rpm value next to a 2-pole model heading, so exact speed and drawing must be confirmed in the signed quotation.

Confirm before ordering For either voltage, give the single-line diagram, starting voltage dip limit, load torque/inertia, protection scheme, cooler airflow, site altitude/ambient and transport envelope. Request exact rotor/bearing choice, thermal and vibration tests, cable/terminal arrangements and final certified drawings. Do not substitute a 10 kV row into a 6 kV inquiry.

View YKK 6kV high-voltage induction motor →

02 / FOR A 6 OR 10 KV PROJECT

The 10 kV branch needs its own engineering review

The official 10 kV YKK page names a separate standard configuration. A high-voltage order should resolve grid, mechanical and cooling interfaces before commercial comparison.

Network and protection

Specify 10 kV/50 Hz only if that matches the installation, plus short-circuit level, permitted start count, voltage dip, soft starter or converter, insulation coordination and relay settings. Confirm rated current and starting characteristic for the exact YKK suffix rather than a neighbouring table row.

Cooling, bearings and foundation

The page identifies IC611 and top-mounted air-to-air cooling, with rolling or sleeve bearings depending on speed and power. Request the actual bearing type, lubricant system, cooler maintenance clearance, foundation loads, shaft location and final outline. Its dimensions are expressly presented as reference values pending a manufacturer drawing.

Factory acceptance

Agree on witnessed insulation, temperature-rise, vibration and load or equivalent tests, including test conditions and acceptance limits. Obtain a record tied to serial number and model revision; a corporate statement that all high-voltage motors are tested does not replace the specific motor's factory report.

03 / WHAT IS VERIFIED

Use the catalogue and independent identity record for different purposes

Identifiable company, different product evidence

The official site uses 杭州立新电机股份有限公司 and provides the Y2, YE4/YE5 and YKK 6/10 kV pages. A Zhejiang public enterprise list includes the same Chinese company in Fuyang District. That public list corroborates the corporate identity at its publication date; it is not an audit of the published catalogue or current product certificates.

Historical specifications and present-day obligations

Y2's EFF2-era description and YE4/YE5's inconsistent standard notation make exact-model documentation essential. The YKK pages also include broad equipment, process and longevity claims, some repeated between voltage classes. This profile does not turn those claims into guaranteed performance, current certification or service life.

Keep replacements comparable

A Y2 replacement, an efficiency retrofit and a high-voltage YKK project have different risk and acceptance criteria. For each proposed unit, reconcile the quotation, technical drawing, test report and nameplate against the same voltage, frequency, duty, mounting and load profile before authorising a purchase.

Published motor range

4 series

Company information

Company name
Hangzhou Lixin Motor Co., Ltd.
Chinese registered name
杭州立新电机股份有限公司
Region
Zhejiang, China
Record updated
2026-10-07

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail