YB2 high-voltage flameproof: keep the 6 kV and 10 kV sheets apart
The manufacturer's YB2 site has distinct 6 kV and 10 kV pages. The inspected 10 kV table gives a YB2-4501-2 row at 220 kW, 16.1 A, 2985 rpm, 94.2% efficiency and 0.84 power factor. Those are one tabulated two-pole frame-450 rating, not a promise about a 6 kV machine, its outline or an available build today. The English table labels are imperfect, so the Chinese heading, unit and row must be read together.
Confirm before ordering Send plant bus voltage and frequency, starting arrangement, fault/voltage constraints, load torque and inertia, installation class, cooling, shaft and foundation drawings. Request the exact 6 or 10 kV model sheet, matching outline and terminal arrangement, current protection certificate and acceptance-test scope.
YBK3 or YBK2 for an underground mining installation
Liming lists YBK3 and YBK2 separately as underground mining explosion-protected motors. Their inspected product pages show family names and photographs, not an orderable parameter table or a certificate for a selected build. Do not substitute a general industrial YB2 marking for a mining-use requirement merely because both are called flameproof.
Confirm before ordering State mine and location classification, methane or other gas exposure, equipment duty, supply, drive/starter, ambient, enclosure and required mine-safety approvals. Ask for a current nameplate, certificate and mine-use scope matching the exact motor, factory and installation.
Permanent-magnet direct drive: establish what equipment is removed
The current catalogue also lists a permanent-magnet direct-drive synchronous motor and a separate flameproof inverter-fed direct-drive entry. These are not a different name for the YB2 induction family. A retrofit may change base speed, gearbox interface, cooling and inverter behavior. The public titles alone do not define a continuous torque curve or protected-area approval.
Confirm before ordering Provide driven-machine duty cycle, shaft torque at minimum and maximum speed, existing gearbox ratio, inertia, space and coupling dimensions, brake/hold needs, drive details and site classification. Request an integrated motor-drive proposal and variant-specific drawings and approvals.