01 / MATCH THE MACHINE BEFORE THE SERIES
Three published families solve three different replacement jobs
Z4 for a compact industrial DC drive
The Z4 source gives 160 V and 440 V as standard armature-voltage choices, separately excited field with a published standard 180 V field circuit, and S1 continuous duty under its stated site conditions. It also explains armature-voltage speed control below base speed versus field weakening above it. The family is described as forced ventilated, with IC06/IC17/IC37 options and an independently powered blower. None of those figures identifies the winding, base speed or blower in a particular frame.
Confirm before ordering Provide the old motor nameplate, armature converter output and ripple, field supply, base/top speed, shaft and foot dimensions, blower power and cooling-air path. Ask for the proposed exact Z4 frame, speed-torque curve, field-loss protection and a dimension/interchange drawing. The maker specifically notes an IEC72 mounting exception for the axial distance between foot holes, so verify that dimension rather than assuming drop-in fit.
View Z4 DC motor →
Medium-size Z where frame and rectifier define the project
The medium Z series publishes a 500–710 mm centre-height range and 440/550/610/750 V standard armature choices. Its conditions state S1 duty, ambient air no higher than 40 °C and altitude no higher than 1000 m. The page distinguishes IP23 and IP44 enclosures and IC06, IC17, IC37 and ICW37A86 cooling choices. Those are alternatives, not a promise that every electrical rating is available in every enclosure/cooling combination.
Confirm before ordering Share the old centre height, shaft and coupling, supply topology, converter pulse number and ripple, field connection, required base speed and environmental limits. Ask for the exact electrical row and matched cooling package. The published medium-Z rectifier guidance includes a minimum six-pulse supply and ripple condition at rated base conditions; have the supplier check the installed converter rather than copying only the DC voltage.
View Z medium-size DC motor →
ZZJ-800 for rolling-mill auxiliary cycles
ZZJ-800 is described for mill rollers, screwdowns, tension equipment and shear or crane auxiliaries with repeated starting, braking, reversing and overload. Its source separates externally ventilated S1 continuous, enclosed S2 short-time and enclosed S3 intermittent forms, with 220 V or 440 V standard armature choices. The S3 load-duration reference is not an automatic continuous power rating; the source also gives different IP and cooling options by construction.
Confirm before ordering State the actual cycle with reversals, acceleration time, braking method, peak torque, starts per hour and load duration; add the mill's converter and field-circuit details. Request the exact ZZJ frame's allowable torque-versus-speed and duty table, enclosure/cooling drawing, shaft taper and coupling dimensions. Verify the motor and blower sequencing before commissioning.
View ZZJ-800 rolling-mill auxiliary-drive motor →