YE2 low-voltage three-phase induction motor

Manufacturer catalogue image · Series illustration

AC induction motors

YE2 low-voltage three-phase induction motor

Power
0.18–400 kW
Cooling
IC411
Insulation
Class F
Protection
IP55

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

Replacing a 22 kW YE2: preserve the driven speed before comparing the frame

BOODO lists both a two-pole 180M and a four-pole 180L at 22 kW. They differ in speed, shaft torque and base length. A quote that repeats only “22 kW, 380 V” can therefore describe a motor that cannot perform the same job or fit the same base.

Same output power, two different replacements

YE2-180M-2: 2930 rpm and 71.7 NmThe two-pole rating lists 41.1 A at 380 V, starting-current ratio 8.1 and starting-torque ratio 2.2. In the B3 outline, frame 180M has A × B foot-hole spacing of 279 × 241 mm and overall length L = 700 mm. This is the faster of the two catalogue entries; it is not a speed-equivalent replacement for the four-pole motor.
YE2-180L-4: 1475 rpm and 142.4 NmThe four-pole rating lists 42.9 A at 380 V, starting-current ratio 7.7 and starting-torque ratio 2.1. The 180L B3 outline retains the 279 mm transverse spacing but uses B = 279 mm and L = 740 mm. Longitudinal mounting spacing grows by 38 mm, and total length grows by 40 mm.
The shared shaft is only one part of the fitBoth B3 frame rows give a 48 mm drive-end shaft diameter, 110 mm extension and 14 mm key width. A coupling bore may therefore appear compatible even while speed, transmitted torque and base holes are wrong. Match the complete motor designation against the existing machine and check the driven equipment’s permitted speed.

Turn the catalogue’s starting ratios into questions for the electrical design

For the four-pole entry, expect a substantially larger starting current

Multiplying 42.9 A by the listed ratio 7.7 gives about 330 A. Its listed starting torque is about 299 Nm, calculated as 142.4 × 2.1. These calculations interpret the catalogue’s ratios; they are not measured starting records, breaker settings or a guarantee that a high-inertia load will accelerate.

Supply the starting method and the load history

State whether the machine uses direct starting, a soft starter or a converter, together with available supply capacity, acceleration time, load inertia and starts per hour. Ask for the permitted starting duty and torque-speed information for the offered motor. Reducing voltage to reduce starting current also changes the available starting torque; the direct-start ratios cannot simply be carried across.

Do not infer the winding connection from the diagram collection

The archive contains star, delta, star-delta and multi-speed connection diagrams for several product families. Their presence does not prove that this exact YE2 winding supports every method at 380 V. Obtain the delivered nameplate and terminal diagram before specifying the starter or terminal links.

Use this archive for the identified series, not a current compliance claim

The YE2 introduction cites GB 18613-2012 grade 3, and the archive separately covers YE3 and other motor types. For a new procurement, request a current efficiency declaration for the exact model and destination market. Do not substitute another section’s efficiency, braking or variable-speed features into the YE2 offer.

CATALOGUE OVERVIEW

About this motor series

Bodun’s downloadable low-voltage catalogue separates standard YE2 and YE3 motors from inverter, brake, multi-speed and large-output variants. The YE2 introduction specifies frames 80–355, 0.18–400 kW, IP55 protection, class F insulation and IC411 cooling. The published ambient range is −15 to +40 °C at an altitude up to 1000 m.

For a replacement enquiry, identify the complete YE2 model, pole count and installation drawing. The same archive contains distinct YE3 tables and a 355–450-frame high-output range; those entries should not be mixed into the YE2 rating. Its efficiency discussion cites an older national standard, so destination-market efficiency compliance needs a current model-specific declaration rather than an inference from the series name.

Model / series reference: YE2

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Power
0.18–400 kW
Cooling
IC411
Insulation
Class F
Protection
IP55
Frame Range
80–355
Output Range
0.18–400 kW
Product Type
Low-voltage high-efficiency three-phase induction motor
Ambient Range
−15 to +40 °C
Catalogue Scope
Product family / configuration confirmed on inquiry
Detailed Family
YE2
Maximum Altitude
1000 m
Voltage
Confirm supply
Speed
Model dependent
Manufacturer
BOODO

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail