YEJ2 aluminium-housing electromagnetic brake motor

Manufacturer catalogue image · Series illustration

Brake motors

YEJ2 aluminium-housing electromagnetic brake motor

Voltage
220/380 / 380/660 V
Product Type
YEJ2 aluminium-housing electromagnetic brake motor
Catalogue Scope
Manufacturer model or series
Maximum Altitude
1000 m

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

Check the YEJ2 brake end and mounting pattern before treating it as a replacement

Two details in Deli’s YEJ2 documentation can change a replacement decision: the 90S and 90L versions share the listed overall length but have different B3 foot spacing, and the brake section is IP23 even when the motor enclosure is specified to a higher IP option. Select the complete motor-and-brake assembly for the actual machine.

90S and 90L: identical length does not mean identical feet

Dimensions below are in millimetres. The B3 drawing is foot-mounted without a flange; the separate B5 drawing is flange-mounted without feet. Confirm the ordered arrangement and manufacturing tolerances on the final drawing.

Dimension90S90L
B3 transverse foot spacing A 140 140
B3 axial foot spacing B 100 125
B3 shaft centre height H 90 90
Shaft D × E 24 × 50 24 × 50
Key width F 8 8
Overall length L 384 384
B5 flange designation FF165 FF165
B5 pitch circle M / register N 165 / 130 165 / 130

Do not apply the motor’s enclosure rating to the brake

The brake is a separately specified part of this assembly

Deli lists motor enclosure choices IP44, IP54 or IP55, while the brake section is listed as IP23. If the existing installation depends on a sealed motor enclosure, check the brake-end exposure as well. State water spray, dust and cleaning conditions and request the complete supplied assembly’s protection specification.

Allow room to access the brake end

The listed 384 mm length for frames 90S and 90L describes the motor outline, not a service clearance. Send a photograph or layout of the adjacent guard and machine structure. Ask for the access needed to inspect, adjust and service the specified brake before fixing the motor position.

Make the brake requirement measurable in the enquiry

Describe the stop, not only the running kW

Give the driven inertia, operating speed, required stopping time, stops per hour and whether the brake must hold a stationary load. The public YEJ2 page does not supply a model-specific braking-torque or permissible braking-energy table. Ask for those ratings for the proposed brake; matching frame 90 and shaft dimensions does not establish stopping performance.

Specify the brake’s electrical circuit separately

Request coil voltage, rectifier requirements, release and engagement times, and a connection diagram for the supplied brake. The published 50/60 Hz and 220/380 or 380/660 V options concern the motor supply; they do not identify the brake coil voltage. Include the existing control sequence and power-loss behaviour you require.

Confirm the complete order configuration

Identify B3 or B5, the motor winding and supply, the selected B or F insulation option, and motor plus brake protection ratings. Deli states continuous rated operation up to 1000 m altitude and 40°C ambient under its listed conditions. Repeated braking is an additional duty to specify, rather than something established by the continuous-running statement.

CATALOGUE OVERVIEW

About this motor series

Deli’s YEJ2 aluminium-housing brake motors list 50/60 Hz and 220/380 V or 380/660 V winding options. Motor enclosure options are IP44, IP54 or IP55, but the brake section is separately specified as IP23. This distinction matters when installing the assembly in a wet or dusty location. The source states continuous operation within 1000 m altitude and ambient temperature up to 40 °C.

Model / series reference: YEJ2

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Voltage
220/380 / 380/660 V
Product Type
YEJ2 aluminium-housing electromagnetic brake motor
Catalogue Scope
Manufacturer model or series
Maximum Altitude
1000 m
Frequency Options
50 / 60 Hz
Insulation Options
Class B / F
Brake-section Protection
IP23
Motor Protection Options
IP44 / IP54 / IP55
Power
Confirm configuration
Speed
Model dependent
Manufacturer
Deli Electric Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail