YEJ three-phase brake motor

CATALOGUE OVERVIEW

About this motor series

The Shenchuan YEJ series combines a three-phase induction motor with a disc brake for machinery that needs rapid stopping or positioning. The official technical sheet describes applications in machine tools, packaging, woodworking, food processing, chemical, textile and construction equipment. It also describes a manual-release arrangement, useful when assessing commissioning and maintenance access. The published operating environment is -15 to +40 °C at an altitude no higher than 1000 m; installations beyond those conditions need agreement with the manufacturer. A brake-motor enquiry should identify stopping frequency, load inertia, required brake torque and whether the brake must hold a suspended load. Confirm the brake supply and rectifier, release time, mounting dimensions and full motor rating for the selected frame before ordering.

Model / series reference: YEJ

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Altitude

Up to 1000 m

Motor Type

Three-phase asynchronous with disc brake

Application

Rapid stopping and positioning of machinery

Manual Release

Available on the manufacturer’s brake-motor design

Ambient Temperature

-15 to +40 °C

Power

Confirm configuration

Voltage

Confirm supply

Speed

Model dependent

Request current pricing, MOQ, lead time and a dimensioned drawing for the exact configuration offered. Catalogue drawings may cover several variants.

Catalogue reference

Manufacturer

Shenchuan

Product reference

YEJ three-phase brake motor

Source reviewed

2026-09-23

Specifications describe the manufacturer’s published catalogue. They are not a test report or a guarantee that every option can be combined.

Supporting technical references

• Manufacturer technical reference 1 ↗

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.