MOTOR MANUFACTURER · Fujian, CHINA

WONDER

Fujian Wonder Motor makes a broad motor and pump catalogue in Fu'an, but the two entries represented here solve a narrower question: which NEMA 56 single-phase starting arrangement fits a 60 Hz machine? Its WSEDC56 is catalogued as capacitor-start; WSEFL56 is catalogued as a dual-capacitor series. Both pages list the same family envelope—1/4–2 HP, 115/230 V, two or four poles—so horsepower alone cannot distinguish the right replacement. Begin with the machine's starting load, then verify the complete model, wiring and mounting against the installed motor.

LocationFujian, China
Published catalogue2 product series
Motor families1 represented

WONDER · SINGLE-PHASE NEMA 56

WONDER NEMA 56 single-phase motors: choose the starting circuit

Explore the published range ↓

01 / ELECTRICAL ARCHITECTURE

The capacitor arrangement is the first selection decision

WSEDC56: capacitor-start series

WONDER's own WSEDC56 page names it a single-phase capacitor-start NEMA-frame motor. The catalogue gives frame 56, 1/4–2 HP, 115/230 V and 60 Hz, with two- and four-pole family options. These are series choices; it does not publish a complete start-torque curve, start-switch diagram or available combination matrix for a particular order. Do not infer that any listed horsepower will start a loaded compressor or pump.

Confirm before ordering Send the driven-machine type, breakaway torque or current machine's locked-rotor behavior, supply voltage under starting load, starts per hour and the old motor's complete nameplate. Ask for the exact WSEDC56 code, starting-current and torque data, capacitor/switch arrangement and a connection diagram.

View WSEDC56 single-phase capacitor-start motor →

WSEFL56: dual-capacitor series

The manufacturer describes WSEFL56 as a single-phase dual-capacitor motor and highlights start and run behavior. Its published frame, horsepower, voltage, pole and speed options overlap WSEDC56. That overlap is not evidence of identical running efficiency, current, torque or interchangeability. The buyer needs the selected model's actual start and run capacitor values and thermal protection, not just the series label.

Confirm before ordering Specify whether the machine starts against pressure or mechanical load, expected run time, ambient temperature and allowable enclosure space. Request the exact connection diagram, capacitor ratings, full-load current, start/locked-rotor data, duty and overload protection for the offered WSEFL56 model.

View WSEFL56 single-phase dual-capacitor motor →

02 / MECHANICAL AND SUPPLY FIT

NEMA 56 is a frame starting point, not a complete interchange drawing

Match the actual shaft and mount

The two official pages state frame 56 but do not show every shaft extension, keyway, foot or flange variant in their text. For a replacement, collect the old motor's mounting-hole pattern, shaft diameter and length, key, rotation, terminal-box position and clearance envelope. Ask WONDER for a dimensioned drawing for the exact proposed code before approving the machine fit.

Interpret speed as a family option

Both manufacturer pages list 3400 and 1700 r/min alongside two- and four-pole options at 60 Hz. Those approximate speeds belong to different selections. Confirm the quoted motor's rated speed at its rated load, pulley or pump ratio, rotation and permissible slip; never treat the two speeds as a selectable setting on one ordinary induction motor.

Check the local single-phase supply

The catalogue lists 115/230 V and 60 Hz, plus a 1.15 service factor. It does not establish that every power/pole variant is dual-voltage or suitable for a 50 Hz site. Request the exact nameplate and wiring links, frequency, starting voltage drop and overload setting. Service factor is not permission to size the motor continuously at overload.

03 / SEND A DECISIVE RFQ

A useful quotation needs the load and the old installation

What does the machine start against?

Describe the pump, compressor, fan or mechanical drive, whether pressure or load remains at start, and the number of starts per hour. Include the existing motor's full nameplate and any observed trip or slow-start symptom. Request a model-specific starting-torque/current match, rather than selecting on the 1/4–2 HP family envelope.

Which electrical details must appear on the offer?

Ask for the exact code and rated voltage/frequency, full-load amps, wiring and rotation diagram, start/run capacitor values where applicable, start-switch or relay arrangement, thermal protection, enclosure and duty. A photograph of a similar frame cannot answer these questions.

How will fit and acceptance be checked?

Provide the existing outline or measured shaft, mounting and terminal clearances. Require a drawing and nameplate for the offered variant, then agree a loaded start, steady-state current, temperature and rotation check on the intended machine before treating it as a drop-in replacement.

04 / WHAT HAS BEEN VERIFIED

The maker and catalogue are identified; the exact order still needs confirmation

Company and manufacturing scope

The maker's Fu'an site identifies 福建万达电机有限公司 and lists IEC, NEMA, single-phase and pump ranges. A Fujian provincial public list independently names that legal entity in Ningde. This corroborates company identity and broad activity; it is not a current audit or approval of either NEMA 56 model.

Two series pages, not a model matrix

The manufacturer's WSEDC56 and WSEFL56 pages each list frame 56, 1/4–2 HP, 115/230 V, 60 Hz, two/four poles, 3400/1700 r/min and service factor 1.15. Neither page establishes every possible combination, a torque/current curve or an installation drawing for a chosen code. The final offer must carry these model-specific documents.

Published motor range

2 series

Company information

Company name
Fujian Wonder Motor Co., Ltd.
Chinese registered name
福建万达电机有限公司
Region
Fujian, China
Record updated
2026-10-07

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail