WSEFL56 single-phase dual-capacitor motor

CATALOGUE OVERVIEW

About this motor series

WONDER presents the WSEFL56 as a single-phase dual-capacitor NEMA motor family. Its page lists frame 56, 1/4–2 HP, 115/230 V, 60 Hz and two- or four-pole configurations, with speeds of 3400 or 1700 rpm and a 1.15 service factor. The dual-capacitor arrangement distinguishes this entry from the manufacturer's capacitor-start-only WSEDC56 family even though their published output ranges overlap. The available voltage and speed options still require a complete model selection. Send the driven load, starting requirement, duty and mounting drawing when requesting a quotation. Confirm the start/run capacitor details, thermal protection and operating characteristics for that model; neither similar appearance nor matching nominal horsepower proves that two motors will behave identically in the same installation.

Model / series reference: WSEFL56

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Power

0.1864–1.4914 kW

Voltage

115/230 V

Frame

NEMA 56

Poles

2 or 4

Frequency

60 Hz

Output Range

1/4–2 HP

Speed Options

3400 or 1700 rpm

Service Factor

1.15

Capacitor Arrangement

Start and run capacitors

Speed

Model dependent

Request current pricing, MOQ, lead time and a dimensioned drawing for the exact configuration offered. Catalogue drawings may cover several variants.

Catalogue reference

Manufacturer

WONDER

Product reference

WSEFL56 single-phase dual-capacitor motor

Source reviewed

2026-09-23

Specifications describe the manufacturer’s published catalogue. They are not a test report or a guarantee that every option can be combined.

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.