MOTOR MANUFACTURER · Shandong, CHINA

Shanbo Motor

SHANDONG SHANBO MOTOR GROUP CO.,LTD

Shanbo publishes industrial AC drives beside control DC motors and vehicle auxiliaries. A factory's common name does not make these interchangeable: begin with the machine, supply and duty, then request the exact motor and controller revision.

LocationShandong, China

Published catalogue2 product series

Motor families2 represented

BOSHAN · AC, DC AND VEHICLE DRIVE SYSTEMS

Shanbo Motor: industrial drives and small DC systems need different briefs

Explore the published range ↓

01 / MACHINE FIRST

Industrial rotation, controlled motion and vehicle auxiliaries are separate buys

Industrial AC: match the shaft and load before the efficiency label

The group's own catalogue names YE2/YE3 three-phase induction, YEJ electromagnetic-brake, YTPS/YVP variable-frequency and several high-voltage families. A conveyor or pump replacement needs the correct mechanical fit and starting method; a brake motor additionally needs a defined stopping load and brake supply. The broad AC range on MotorSourcing is a catalogue reference, not one rated motor.

Confirm before ordering Send load torque-speed curve, line voltage/frequency, starting topology or VFD, duty, frame/mounting, shaft/coupling, cooling, ambient and brake holding/stopping requirements. Ask for one ordering code, current performance sheet, outline drawing and brake wiring if applicable.

View Industrial AC motor range →

Control DC: decide motor, gearbox and electronics together

The company separates permanent-magnet brushed, brushless, servo and geared DC categories. The relevant question is often output-shaft speed and torque after a reducer, as well as feedback and controller behaviour, rather than motor no-load rpm. Its older corporate detail pages for a permanent-magnet and a brushless motor give category names and photographs but no complete ordering matrix.

Confirm before ordering Provide continuous and peak output torque, motion profile, gearbox ratio and backlash limit, supply and peak current, controller/encoder interface, envelope, duty and expected life. Require a quoted motor-plus-reducer configuration, torque-speed/current curves and connector/shaft drawings.

View Industrial DC motor range →

Vehicle ABS or vacuum pump: validate at the subsystem boundary

Shanbo's vehicle catalogue publishes individual ZDY motor test points for ABS and electronic-vacuum-pump duties. For example, the ZDY1618 vacuum-pump entry distinguishes 13 V no-load speed from a 0.2 N·m loaded point; ZDY1621 uses a different 12 V/0.1 N·m loaded point. These are separate variants and test conditions, not a composite performance promise. Motor performance alone does not approve the braking or vacuum system.

Confirm before ordering State pump or ABS module revision, electrical transient profile, duty and thermal envelope, functional and endurance requirements, interface drawing and system validation plan. Request the exact ZDY variant, current production revision, point-by-point test report and customer qualification scope.

02 / SEPARATE PRODUCT FROM COMPANY CLAIMS

Public records support the business identity, not an automatic product approval

The group and product breadth are independently traceable

The corporate site identifies Shandong Shanbo Electric Machine Group in Boshan and organizes AC, DC, geared and vehicle products. A Zibo government gazette independently discusses the group in relation to brushless and stepper motor development, while municipal project records identify separate motor and automotive-component initiatives. These records support the company's industrial presence; they do not certify any quoted motor or prove today's project completion.

Read the vehicle data one row at a time

The published ZDY1618 entry gives 13 V, 4200 ± 400 rpm at zero torque with current at most 4 A, and 3500 ± 400 rpm at 0.2 N·m with current at most 12 A. It states S2 duty. The ZDY1621 entry instead gives 12 V and different test points. Do not combine the faster speed, lower current and greater torque from different rows or variants into a supposed standard motor. Obtain the original drawing and test method before design freeze.

Avoid transferring certificates between product businesses

The group describes quality-system certifications and military/automotive market experience. A buyer should ask which legal manufacturing entity and facility, certificate scope, production line and exact product revision apply to the purchase. An industrial AC motor family, a vehicle auxiliary and a geared DC unit can have different test and approval paths.

03 / MAKE CANDIDATES COMPARABLE

Tell Shanbo what assembly must work, then request a specific return package

What must be in the buyer's brief?

Identify the application and whether the purchase is an industrial AC motor, DC motion unit, geared assembly or vehicle auxiliary. Include supply and transient limits, continuous/peak load trace, speed profile, shaft and mounting drawing, controller/feedback ownership, duty and ambient, required certifications/market, quantity and target test date. For a replacement, include the incumbent drawing and measured operating point.

What should the supplier return?

Ask for one exact ordering code and revision, included motor/gearbox/drive components, signed dimensions, torque-speed-current or efficiency data at matching test conditions, thermal and endurance evidence at the machine duty, certificate scope where required, sample plan and quotation. Do not compare a bare-motor price with a controlled or geared assembly.

Published motor range

2 series

Industrial AC motor range

Power: Confirm configuration
Voltage: Confirm supply

View specifications →

Industrial DC motor range

Applications: Vehicle drives / servo / switchgear
Catalogue Families: SZ / ZY / ZYT / SY / ZCF; geared DC