MOTOR MANUFACTURER · Zhejiang, CHINA

Shenyin Motor

Wenzhou Shenyin's catalogue distinguishes its dust-protected YFBP polishing-machine motor from YBX3/YB3 flameproof three-phase drive families. The polishing station's combustible dust, belt load and shaft arrangement demand a different brief from a general pump or fan motor. Clarify whether the order is a complete polishing machine, a replacement motor or a drive with pulley and guarding, then match the precise delivered variant to the site classification and current approval documents.

LocationZhejiang, China
Published catalogue3 product series
Motor families1 represented

SHENYIN · POLISHING AND HAZARDOUS-AREA DRIVES

Shenyin dust-safe polishing motors: define machine and motor scope

Explore the published range ↓

01 / WHAT IS THE SUPPLY

The YFBP dust-polishing motor is a specialised station, not a generic Ex drive

YFBP: motor for a dust-generating polishing station

The manufacturer's YFBP page calls the product a polishing-machine-specific dust-protected three-phase induction motor, with 112 and 132 frame references, 380 V/50 Hz, S1 duty and B3 mounting. Its table lists discrete 4 kW and 5.5 kW entries with 2- or 4-pole synchronous-speed columns. The page describes dust seals at both shaft ends and a surface-temperature limit in its original protection marking. Those statements concern a family and an older document edition, not a present certificate for every offered motor.

Confirm before ordering State the polishing machine, dust type, area classification, belt or wheel diameter, shaft extension on each end, required 2- or 4-pole variant, run hours and dust-extraction arrangement. Request the full motor code, certified marking, pulley fit, guard and current operating instructions for the exact package.

YBX3: flameproof induction drive for another load

The separate YBX3 catalogue page describes a 63–355 frame high-efficiency series with 380 V, 660 V and dual-voltage options, 50 Hz and S1 duty. It discusses gas-flameproof and dust-protection markings as distinct applications, as well as multiple mounting and terminal-box options. A YBX3 of similar power is not automatically a YFBP polishing replacement: shaft-end seals, pulley loading, mounting and certified marking can differ.

Confirm before ordering Give the connected machine's load curve, site zone and gas/dust group, selected kW/speed, frame, shaft, mounting, terminal orientation and supply. Ask for the exact nameplate and current certificate that covers the proposed use.

View YBX3 high-efficiency explosion-proof motor →

YB3 and YFB2 need their own evidence

Shenyin's site lists YB3 as a further flameproof motor family and YFB2 as a dust-protection line. The YFB2 item has photographs but almost no readable specification text. Avoid treating the family names as interchangeable and obtain a current variant sheet, protection marking and drawing before proposing either as a substitute.

Confirm before ordering For any alternative, request a written interchangeability matrix against the original motor: electrical rating, Ex marking, frame, shaft, cable entry, ambient limit, installation and maintenance instructions.

View YB3 explosion-proof motor →

02 / SITE-SPECIFIC SAFETY

Polishing dust makes enclosure, temperature and service method part of selection

Which dust and zone are documented at this machine?

Provide the site's combustible-dust assessment, zone, dust group, layer/cloud ignition information, permitted surface temperature, cleaning practice and ambient range. The catalogue's historic Ex notation and older referenced standards are not a current approval for a different jurisdiction or variant.

How do pulley and two shaft ends affect the motor?

The YFBP instructions discuss direct pulley mounting to both shaft extensions and require balanced pulleys. Supply belt tension, overhung loads, pulley position and guard details; ask the manufacturer for bearing-load limits and the exact shaft drawing. An apparently matching kW can still overload bearings or compromise the dust seals.

Will field wiring and maintenance preserve protection?

Provide cable size and entry route, approved gland/seal selection, earthing scheme, cleaning interval and access to seals and bearings. Ask for the selected unit's certified cable-entry and service instructions. Opening or replacing parts in a dust area must follow the operator's safe-work process and current certified configuration.

Which evidence accompanies the exact delivered unit?

Require the full model and serial number, current certificate and marking, drawing, temperature and electrical test record, shaft/pulley data, installation manual, spare seal and bearing references, and a signed list of exclusions if the polishing machine itself is not supplied.

03 / DON'T COMPARE UNLIKE ITEMS

Keep the polishing assembly and motor-only quotes on one basis

Define machine scope first

The company's public language alternates between a dust-proof polishing machine and a polishing-machine-specific motor. A buyer should explicitly list motor, shaft-end pulleys, guards, base, controls, extraction connection and commissioning. A bare motor price cannot be compared with a complete polishing station.

Select a single YFBP variant

The public table lists 112/132 frame and 4/5.5 kW choices, but does not provide a full motor code and dimension sheet for every combination. Ask for the particular pole count, rated speed, shaft-end layout, load and mounting drawing, and the certification record that corresponds to that variant.

Require a revisioned compliance packet

The website quotes older national standards and contains inconsistent notation in places. Base purchase acceptance on the current applicable standard edition, named certificate and actual unit marking, with any deviations documented by the supplier and the facility's hazardous-area authority.

04 / WHAT HAS BEEN VERIFIED

Historic product testing cannot certify every present-day model

Manufacturer evidence

Shenyin's own company and product pages establish its stated focus on dust-protected polishing equipment and flameproof motors, with separate YFBP, YBX3, YB3 and YFB2 entries. Their details support distinct procurement routes but do not substitute for a current, order-specific certificate.

Narrow independent test evidence

A 2018 public report on a national market-surveillance sample lists one Shenyin YB3-100L2-4, 380 V, 3 kW batch as passing the sampled checks. That result is useful company/product history only; it does not certify YFBP, YBX3, YFB2, another serial number or today's production.

Published motor range

3 series

Company information

Company name
Wenzhou Shenyin Explosion proof Motor Co., Ltd.
Chinese registered name
温州申银防爆电机有限公司
Region
Zhejiang, China
Record updated
2026-10-07

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail