01 / WHAT MOTION MUST THE MACHINE MAKE?
The motor creates motion; the equipment sets the required force
YZS on a screen or feeder
Xindian describes YZS as an excitation source for screening, conveying, silo flow and other vibration machinery. The published YZS page states a base 380 V, 50 Hz supply and -15 to +40 °C ambient. Its adjustable eccentric weights change force, while installation determines the resulting direction of vibration. The page expressly limits ordinary YZS use to conditions without explosion protection requirements or conductive dust; do not select it for a hazardous or conductive-dust location by default.
Confirm before ordering Provide machine mass, target stroke and frequency, required resultant force, whether one or two motors are synchronized, mounting orientation and measured supply. Ask for the exact YZS force setting and drawing.
View YZS vibration motor →
VB for horizontal mounted excitation
The VB page describes adjustable eccentric masses on both ends of a double-ended shaft and a horizontal, enclosed self-cooled three-phase motor at 380 V/50 Hz. Its table separates variants by force, speed, power, current and mounting dimensions. For example, the published 2-pole VB-322-S and VB-552-W rows have different listed force, power and bolt sizes; the series name by itself is not a mechanical replacement specification.
Confirm before ordering Send the existing VB model and force setting, bolt pattern, base thickness, shaft/guard clearance, motor orientation and duty. Request a drawing and rated-current confirmation for the actual variant.
View VB vibration motor →
Vertical or rotary-screen motion
The separate YZUL page identifies a vertical motor for rotary or compound-rotary vibrating machinery and describes a single-flange mounting arrangement. This is a distinct machine interface from the horizontal VB application, so a similar force figure is not enough to substitute the assembly. Xindian's site lists other silo and combined exciters; selection depends on the actual machine path and installation geometry.
Confirm before ordering Provide screen or filter manufacturer/model, flange and shaft interface, intended top/bottom eccentric settings, process material and cleaning environment. Ask for the exact vertical variant drawing and adjustment instructions.