BT aluminium-housing oil-pump motor

Manufacturer catalogue image · Series illustration

Application-specific motors

BT aluminium-housing oil-pump motor

Phase
Three-phase
Poles
4
Housing
Aluminium
Product Type
BT aluminium-housing oil-pump motor

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

BT oil-pump motors: check the base envelope before the pump interface

Baote’s BT sheet provides useful frame-90 and frame-100 mounting dimensions, but it does not fully dimension the pump connection. It also places a separate Y2W coupling-motor drawing on the same page. Use the BT dimensions for an initial space check, then obtain the selected assembly’s pump interface and electrical sheet.

Frame 100 needs a different base and more enclosure space

Dimensions in millimetres from the upper BT table only. The three frame-90 rows share these dimensions; the drawing does not establish that their electrical ratings are identical.

BT dimensionFrame 90Frame 100
A × B foot-hole spacing 140 × 125 160 × 140
H shaft centre height 90 100
L overall length 254 284
AC outside width shown 176 196
DH overall height 213 231
K1 mounting dimension 10 11
C reference dimension 39 40

Close the gaps that can prevent the pump from fitting

Do not use the lower Y2W flange dimensions

The lower half of the sheet is headed Y2W coupling motor and includes its own flange and coupling dimensions. Those values are not assigned to BT. Request the BT pump locating diameter, fixing pattern, shaft or drive engagement, insertion depth and tolerances for the exact pump.

Resolve the power unit on the accepted motor sheet

The upper table combines a Chinese kW heading with the English wording “Output horsepower.” This page therefore uses its verified dimensional rows without turning the ambiguous output column into an electrical rating. State the required shaft output, voltage, frequency and duty, and obtain the delivered motor’s nameplate values.

Check the hydraulic operating cycle as well as mounting

Supply pump model, intended rotation, flow and pressure conditions, starting load and run/stop cycle. Four-pole, three-phase construction does not specify an exact shaft speed or available starting torque. Obtain the rated speed and starting data needed by that pump arrangement.

Account for the frame change in the machine enclosure

Changing from frame 90 to frame 100 adds 30 mm in overall length, 20 mm in the shown outside width and 18 mm in overall height, while raising shaft centre height by 10 mm. Check coupling alignment, cable access and cooling clearance on the complete assembly; the base dimensions alone do not establish interchangeability.

CATALOGUE OVERVIEW

About this motor series

Baote’s BT aluminium-housing oil-pump motor sheet lists four-pole, three-phase configurations in frames 90 and 100. The BT drawing gives 254 mm overall length for frame 90 and 284 mm for frame 100. A separate Y2W coupling-motor table appears lower on the same sheet; its frame, power and shaft data do not belong to the BT range. Confirm the pump flange and ordered winding against the BT drawing.

The sheet mixes horsepower wording with a kW heading. Electrical output remains unconfirmed, and the separate Y2W table is not used for BT specifications.

Model / series reference: BT

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Phase
Three-phase
Poles
4
Housing
Aluminium
Product Type
BT aluminium-housing oil-pump motor
Frame Options
90 / 100
Catalogue Scope
Manufacturer model or series
BT Overall Length
254 mm (frame 90); 284 mm (frame 100)
Power
Confirm configuration
Voltage
Confirm supply
Speed
Model dependent
Manufacturer
Baote Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail