TOP lubrication-pump motor

Manufacturer catalogue image · Series illustration

Application-specific motors

TOP lubrication-pump motor

Application
Lubrication pump
Product Type
TOP lubrication-pump motor
Phase Options
Single-phase / three-phase
Catalogue Scope
Manufacturer model or series

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

TOP lubrication-pump replacement: identify drawing 1 or drawing 2 first

The TOP catalogue shows two pump-end arrangements, and offers both arrangements in single-phase and three-phase versions. Phase count therefore does not identify the mounting. The same base-hole spacing can hide a different pump-end projection and overall length.

Two arrangements that share the base but differ at the pump end

Drawing 1: overall length 209 mmThe table gives reference dimension C = 54 mm and overall length L = 209 mm. This arrangement is listed twice, once for three-phase and once for single-phase construction. Use “drawing 1” with a marked pump-interface photograph or drawing in the enquiry.
Drawing 2: overall length 227 mmThe second arrangement gives C = 76 mm and L = 227 mm, again with both phase options. C changes by 22 mm while L changes by 18 mm; do not treat the difference as one simple extension dimension or infer an adaptor length from it. Request a dimensioned mating drawing for the actual assembly.
Shared base dimensions do not establish pump interchangeabilityBoth rows give A × B foot-hole spacing of 100 × 80 mm, shaft centre height H = 62 mm, body diameter AC = 129 mm and overall height HD = 127 mm. These values support a base and clearance check. They do not identify the pump register, bolt pattern or required drive engagement.

What to send for a replacement that will actually fit

Identify both the electrical version and pump-end version

Include the old motor nameplate, supply voltage and frequency, single- or three-phase requirement, and the chosen drawing number. For a single-phase replacement, obtain the specified capacitor and connection details if required by that version; the outline sheet does not provide them.

Provide the complete pump connection

Send pump make/model, locating diameter, fixing-hole pattern, drive shape, engagement depth and direction of rotation, with the viewing direction marked. The TOP sheet has D and E columns but does not clearly dimension those features in the shown views. Do not machine an adaptor from an assumed interpretation.

Confirm output and operating cycle before selecting the winding

The output column displays “1/4” beneath mixed kW and horsepower headings. It is not used here as a confirmed power rating. Supply the pump’s operating pressure and flow, start/stop sequence and required shaft speed so the accepted motor sheet can state the actual output, current and duty.

Check access after the pump is attached

Measure the space for the terminal box and cable entry as well as the motor body. Compare the complete installed pump-and-motor length, not just the 209 or 227 mm motor outline, and retain access to mounting fasteners and maintenance points.

CATALOGUE OVERVIEW

About this motor series

Baote’s TOP lubrication-pump motor sheet shows two mounting arrangements for single- and three-phase variants. Both drawings use a 62 mm shaft-centre height; the listed overall lengths are 209 and 227 mm. The pump-side interface changes between the drawings, so a replacement needs the matching flange and shaft drawing. The power heading mixes horsepower wording with a kW label, and the fractional rating is therefore not converted into the output-power filter.

The power-column unit is ambiguous in the source sheet. Request a corrected electrical rating before selecting output power.

Model / series reference: TOP

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Application
Lubrication pump
Product Type
TOP lubrication-pump motor
Phase Options
Single-phase / three-phase
Catalogue Scope
Manufacturer model or series
Mounting Variants
Two manufacturer drawings
Shaft-centre Height
62 mm
Listed Overall Lengths
209 / 227 mm
Power
Confirm configuration
Voltage
Confirm supply
Speed
Model dependent
Manufacturer
Baote Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail