YVFE2 variable-frequency three-phase induction motor

CATALOGUE OVERVIEW

About this motor series

Huanchuang’s YVFE2 is an inverter-fed motor with a separately powered cooling fan. The operating-condition table specifies constant torque from 5–50 Hz and constant power from 50–100 Hz. B3, B5 and B35 mounting forms are described. Applications include lifting, machine tools, textile and paper equipment that need speed regulation or repeated reversal.

The source introduction also mentions a 3 Hz lower limit and IP54/IP55, while its operating table specifies 5 Hz and IP54. Confirm the ordered frequency range and enclosure before selecting the drive.

Model / series reference: YVFE2

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Voltage

380 V

Duty

S1; other duties require confirmation

Cooling

IC416

Frequency

50 Hz base

Insulation

Class F

Frame Height

H90–355

Product Type

YVFE2 variable-frequency three-phase induction motor

Catalogue Scope

Manufacturer model or series

Power

Confirm configuration

Speed

Model dependent

Manufacturer

Hebei Huanchuang

Request current pricing, MOQ, lead time and a dimensioned drawing for the exact configuration offered. Catalogue drawings may cover several variants.

Catalogue reference

Manufacturer

Hebei Huanchuang

Product reference

YVFE2 variable-frequency three-phase induction motor

Source reviewed

2026-09-21

Specifications describe the manufacturer’s published catalogue. They are not a test report or a guarantee that every option can be combined.

The source introduction also mentions a 3 Hz lower limit and IP54/IP55, while its operating table specifies 5 Hz and IP54. Confirm the ordered frequency range and enclosure before selecting the drive.

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.