

Manufacturer catalogue image · Series illustration
YSEW integrated-drive brake motor

- Product Type
- YSEW integrated-drive brake motor
- Configuration
- Integrated gearbox, motor and brake
- Catalogue Scope
- Manufacturer model or series
- Reviewed Variant
- YSEW-85 trolley interface
Catalogue series · Exact configuration and availability confirmed by the manufacturer.
Replacing a YSEW-85 trolley drive: similar speed can hide different gears
A four-pole YSEW-85 can be listed at 26.2 or 26.9 m/min, yet those two assemblies use different wheel diameters, tooth sizes and pinions. For a replacement on an existing trolley, the gear engagement is the first distinction to resolve.
26.2 and 26.9 m/min are two different mechanical assemblies
The standard 6.25-ratio assembly turns its output pinion at 192 rpm. That pinion has 12 teeth of module 4 and engages a 59-tooth gear on the reference 214 mm wheel. The wheel therefore turns at approximately 39.1 rpm: 192 × 12 ÷ 59. Multiplying by the wheel circumference gives approximately 26.3 m/min, consistent with the catalogue’s rounded 26.2 m/min entry.
The 8.5-ratio assembly turns more slowly at its output, 141 rpm, but uses an 11-tooth module-5 pinion and a 49-tooth mating gear with a larger, 270 mm wheel. The same calculation gives approximately 26.8 m/min, close to its listed 26.9 m/min. These calculations explain the catalogue combinations; they are not measured travel tests.
The two drives can consequently look equivalent when compared only by travel speed or their shared 0.4, 0.75 and 0.8 kW motor choices. They are not a like-for-like gear replacement: module-5 teeth do not form a matching pair with the module-4 wheel gear. Retaining an existing 214 mm, module-4, 59-tooth wheel assembly points to the first gear combination, not the second.
Both carry the YSEW-85 designation and list an 85 mm locating pilot with four 11 mm through holes. That shared mounting information does not remove the tooth-size difference. The module-4 arrangement also lists a 95 mm toothed length, while the module-5 arrangement lists 65–95 mm. The complete mounting-hole pattern and axial engagement still come from the actual trolley and assembly drawing.
For slower travel, compare pole counts within the same gear combination
Within the standard 6.25-ratio, 214 mm wheel combination, the six-pole row gives 128 output rpm and 17.5 m/min; the eight-pole row gives 96 rpm and 13.1 m/min. This is a useful distinction for a buyer retaining the wheel gear: the catalogue offers slower reference arrangements without switching to the module-5 wheel combination.
The manufacturer also lists configurable 4/8-pole and 4/12-pole multi-speed versions. Separate four-, six-, eight- and twelve-pole rows are not evidence that a single supplied motor can switch between all four. A replacement must identify whether the original is a single-speed winding or an actual multi-speed arrangement.
The output-speed column is already after the internal reducer. Dividing 192 rpm by 6.25 again would count that reduction twice; treating 192 rpm as wheel speed would omit the external 12-to-59 tooth reduction. Following the actual shaft-to-pinion-to-wheel path avoids both errors.
The 1.1 and 1.5 kW option also changes the drive package
The higher-power catalogue option has a 7.87 internal ratio, a module-4 13-tooth output pinion and the 214 mm, 59-tooth reference wheel gear. Its four-pole row lists 152 output rpm and 22.6 m/min. It is therefore neither the 12-tooth standard assembly with extra power nor the 26.9 m/min module-5 arrangement.
Huyuan expressly requires an inverter for the 1.1 and 1.5 kW choices. This option cannot be selected as a power-only substitution while assuming the existing direct-on-line control arrangement will remain suitable. The catalogue also describes an optional brake version for inverter operation, so the motor, inverter and brake configuration belong in the same offered assembly.
The catalogue does not give a rated trolley mass, stopping distance or application-specific brake torque. The speed comparison therefore helps identify the mechanical arrangement, but it does not select a safe drive for a particular crane load.
CATALOGUE OVERVIEW
About this motor series
Huyuan’s YSEW-85 combines a motor, reduction gear and brake for crane bridge or trolley travel. Its geared output engages the wheel gear rather than directly setting the wheel speed. This page covers the 85 mm pilot variant; other YSEW mounting variants are separate configurations.
Model / series reference: YSEW
Published specifications
Specifications describe a series range; confirm which ratings apply together to the quoted model.
- Product Type
- YSEW integrated-drive brake motor
- Configuration
- Integrated gearbox, motor and brake
- Catalogue Scope
- Manufacturer model or series
- Reviewed Variant
- YSEW-85 trolley interface
- Standard Motor Choices
- 0.4 / 0.75 / 0.8 kW
- Inverter-required Options
- 1.1 / 1.5 kW
- Mounting Pilot For YSEW-85
- 85 mm
- Power
- Confirm configuration
- Voltage
- Confirm supply
- Speed
- Model dependent
- Manufacturer
- Huyuan Motor
Confirm mounting and shaft dimensions against the drawing for the quoted configuration.



