YE4 industrial induction motor family

CATALOGUE OVERVIEW

About this motor series

Shangyang's YE4 technical sheet describes an industrial induction-motor family with frame heights H63–H355 and output ratings spanning 0.12–315 kW. It lists two- through eight-pole options, 50 Hz operation, class F insulation and IC411 cooling. Mounting and enclosure alternatives are shown separately, including B3, B5, B35 and V1 arrangements and IP55, IP56 or IP65 options. These alternatives should not be interpreted as one standard build. The manufacturer identifies uses such as pumps, fans, compressors, machine tools and conveyors. To obtain a comparable quotation, specify the voltage and pole count along with shaft power, mounting and environment. Ask for the model-level efficiency data and confirm which protective and installation options are included in the offered motor.

Model / series reference: YE4

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Power

0.12–315 kW

Voltage

200–1140 V family options

Cooling

IC411

Mounting

B3 / B5 / B35 / V1

Frequency

50 Hz

Insulation

Class F

Frame Range

H63–H355

Pole Options

2–8

Protection Options

IP55 / IP56 / IP65

Speed

Model dependent

Request current pricing, MOQ, lead time and a dimensioned drawing for the exact configuration offered. Catalogue drawings may cover several variants.

Catalogue reference

Manufacturer

Shangyang

Product reference

YE4 industrial induction motor family

Source reviewed

2026-09-23

Specifications describe the manufacturer’s published catalogue. They are not a test report or a guarantee that every option can be combined.

Supporting technical references

• Manufacturer technical reference 1 ↗

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.