DM90 hydraulic-system motor

CATALOGUE OVERVIEW

About this motor series

KINKO’s DM90 hydraulic-unit motors integrate the valve block with the motor end cover. Four DM90 variants are listed at 200, 300, 400 and 500 W output. The 200/300 W entries use 12/24 V DC options; the 400/500 W entries use 24/48 V DC options. The stated adjustable speed band is 300–3000 rpm. Applications include pallet trucks, lifting platforms and vehicle tail lifts; specify the valve-block interface along with the motor.

A separate DM130 table on the same source page is excluded from these DM90 ratings. The source labels S3 with 30 min but does not establish a duty percentage.

Model / series reference: DM90

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Power

0.2–0.5 kW

Voltage

12 / 24 / 48 V DC

Speed Range

300–3000 rpm

Construction

Integrated valve block and front end cover

Product Type

DM90 hydraulic-system motor

Output Options

200 / 300 / 400 / 500 W

Catalogue Scope

Manufacturer model or series

200/300 W Supply Options

12 / 24 V DC

400/500 W Supply Options

24 / 48 V DC

Speed

Model dependent

Manufacturer

KINKOPOWER

Request current pricing, MOQ, lead time and a dimensioned drawing for the exact configuration offered. Catalogue drawings may cover several variants.

Catalogue reference

Manufacturer

KINKOPOWER

Product reference

DM90 hydraulic-system motor

Source reviewed

2026-09-21

Specifications describe the manufacturer’s published catalogue. They are not a test report or a guarantee that every option can be combined.

A separate DM130 table on the same source page is excluded from these DM90 ratings. The source labels S3 with 30 min but does not establish a duty percentage.

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.