BB29 compact brushless DC motor family

Manufacturer catalogue image · Series illustration

DC motors

BB29 compact brushless DC motor family

Power
0.003–0.005 kW
Voltage
12 or 24 V DC
Mass
150 g (3 W); 165 g (5 W)
Feedback
Hall sensors listed

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

BB29 packaging: confirm the internal drive before shrinking the motor space

The BB29 table lists both 3 W and 5 W motors with internal-drive versions and a separate 10 mm internal-driver length entry. The motor-length column changes between the ratings. Decide the complete motor-and-drive envelope and Hall arrangement before comparing only the 29 mm body diameter.

Specify the complete assembly, not only a bare brushless motor

An internal-drive entry changes the integration question

The catalogue marks internal drive “Yes” and gives 10 mm for the internal type’s driver length. The outline labels the main length L separately. Confirm whether the quoted assembly drawing includes that driver section and the cable exit; the page does not explain the length accounting clearly enough to add or subtract 10 mm by assumption.

Hall and no-Hall are options, not one universal pinout

The table marks the Hall choice “Both,” and the customization list separately includes Hall/no-Hall, control, wires, voltage and speed. Put the required sensing and drive arrangement in the order. Obtain the chosen version’s supply and control wiring; the dimensional picture is not an electrical pin assignment.

Keep the mounting threads with the compact package

The outline shows a 29 mm body-diameter callout, two M2.5 mounting holes and a 16 ±0.2 mm mounting-circle callout. Check the mounting screw engagement and cable bend space on the final drawing. A customized shaft or length must be checked as its own configuration rather than assumed to retain every standard dimension.

The two 24 V rows trade length and output at the same rated speed

Exact catalogue rows, both with 3,000 rpm rated speed and 3,600 rpm no-load speed. No-load speed is not a guarantee at the listed torque.

ModelRated outputRated torqueRated currentListed lengthMass
BB29530S24 5 W 0.016 Nm 0.42 A 60 mm 165 g
BB29330S24 3 W 0.010 Nm 0.25 A 50 mm 150 g

Use the drawing and curve for the selected winding

The plotted test is not identified as every model

The performance graphic shows a particular test curve, but does not label the model suffix. Do not read an efficiency peak or stall point from it and assign that value to both 24 V rows or to the 12 V versions. Specify the operating torque and speed, then obtain the matched winding curve if efficiency or overload behaviour is part of the requirement.

The shorter motor still needs a thermal-duty check

The 3 W row saves 10 mm of listed length and 15 g compared with the 5 W row. It also supplies less rated torque. Include the load cycle, starts, ambient temperature and enclosure conditions with the selected model; neither the common no-load speed nor a catalogue life-hours statement establishes service life or continuous overload capability in your assembly.

CATALOGUE OVERVIEW

About this motor series

The BLDC BB29 family contains 3 W and 5 W brushless direct-current variants for 12 or 24 V supplies. The manufacturer's table lists 3000 rpm rated speed for all four combinations, with 0.010 Nm torque for the 3 W variants and 0.016 Nm for the 5 W variants. Body length and mass increase with the output option: 50 mm and 150 g versus 60 mm and 165 g. No-load speed is a separate table value and should not be substituted for rated speed under load. The catalogue also lists Hall sensing and an internal-driver arrangement. For integration into compact equipment, confirm the exact driver implementation, shaft dimensions, wiring and continuous thermal limits, and match the supply voltage to the full model code.

Model / series reference: BB29

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Power
0.003–0.005 kW
Voltage
12 or 24 V DC
Mass
150 g (3 W); 165 g (5 W)
Feedback
Hall sensors listed
Body Length
50 mm (3 W); 60 mm (5 W)
Rated Speed
3000 rpm
Rated Torque
0.010 Nm (3 W); 0.016 Nm (5 W)
Output Options
3 or 5 W
Internal Driver
Listed; confirm selected configuration
Speed
Model dependent

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail