YE4 three-phase induction motor

Manufacturer catalogue image · Series illustration

AC induction motors

YE4 three-phase induction motor

Power
0.55–355 kW
Voltage
380 V
Duty
S1
Cooling
IC411

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

Shiyang YE4 procurement: check starting duty and the actual mounting length

For a fixed-speed pump or machine replacement, the YE4 catalogue provides rated current, speed, starting-current ratios and separate B3, B35 and B5 drawings. These details are more useful than selecting by an efficiency label alone. The examples below keep two four-pole ratings separate and show how the mounting form changes their envelope.

22 and 30 kW four-pole examples at 380 V, 50 Hz

Published catalogue values, not independent test results. B3 is foot mounting; B35 adds a flange; B5 is flanged without feet.

Exact modelRated current / speedListed efficiencyB3 overall LB35 / B5 overall L
YE4-180L-4, 22 kW 41.6 A / 1,480 rpm 94.5% 800 mm 835 mm
YE4-200L-4, 30 kW 56.5 A / 1,480 rpm 94.9% 860 mm 890 mm

The mounting form changes more than the purchase description

180L: allow 35 mm more length for the listed flanged forms

For the 22 kW example, the B3 table lists 800 mm overall length, while B35 and B5 list 835 mm. The shaft is 48 mm diameter with 110 mm extension and a 14 mm key-width entry. The flanged tables identify FF300, a 300 mm fixing circle and a 250 mm register. Use the chosen form’s complete drawing for the housing, coupling and surrounding clearance.

200L: a larger motor also changes the coupling interface

The 30 kW example has a 55 mm shaft, 110 mm extension and 16 mm key width. Its flange entries are FF350, 350 mm fixing circle and 300 mm register. B3 foot spacing is 318 × 305 mm, compared with 279 × 279 mm for 180L. Neither the common 1,480 rpm rating nor a similar overall length makes those two assemblies mechanically interchangeable.

Include starting conditions when choosing switchgear or a drive

The 22 kW row lists a starting-current ratio of 9.5 times rated current; multiplying by 41.6 A gives approximately 395 A. The 30 kW row lists 9 times 56.5 A, or approximately 509 A. These are calculations from catalogue ratios, not measured site currents or protective-device settings. Give the load inertia, starting frequency and supply constraints so the starting method can be selected for the installation.

Compare energy use using the selected motor and its real load

Use the numerical row with its test conditions

The 22 kW row lists 94.5% efficiency and the 30 kW row 94.9%. The larger figure does not by itself make an oversized motor the more economical choice. Obtain efficiency at the intended load and expected running hours; the displayed full-rating rows do not describe the complete part-load curve.

Request the efficiency report instead of treating YE4 as certification

The brochure’s introductory and parameter sections contain inconsistent efficiency-grade and standard wording. Keep the exact model, rated output, pole count and test-standard edition together in the quotation and request the corresponding report when efficiency compliance matters. The catalogue label alone is not a verified efficiency certificate.

Preserve the cooling and environmental conditions

The stated construction is IC411, S1, IP55 and F-class insulation with B-class temperature-rise limits, for −15°C to +40°C and altitude up to 1,000 m. Retain airflow around the motor. If the application requires prolonged low-speed inverter operation, ask for a duty-specific thermal assessment instead of transferring the separate YVF2 family’s forced-cooling envelope to this motor.

CATALOGUE OVERVIEW

About this motor series

Shiyang’s YE4 brochure specifies 0.55–355 kW, 80–355 mm centre heights and a 380 V / 50 Hz supply. It lists IP55, F-class insulation with B-class temperature-rise limits, continuous duty and IC411 cooling. The brochure’s efficiency wording is inconsistent: the introductory text and parameter line do not identify the same efficiency grade. Confirm the efficiency test report for the exact ordered motor rather than relying on the series label.

The official brochure has conflicting efficiency-grade wording. No verified efficiency class is assigned from that line.

Model / series reference: YE4

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Power
0.55–355 kW
Voltage
380 V
Duty
S1
Cooling
IC411
Mounting
B3 / B5 / B35
Protection
IP55
Frame Height
80–355 mm
Product Type
YE4 three-phase induction motor
Catalogue Scope
Manufacturer model or series
Insulation / Temperature Rise
F / B
Speed
Model dependent
Manufacturer
Shiyang Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail