YE5 three-phase induction motor

Manufacturer catalogue image · Series illustration

AC induction motors

YE5 three-phase induction motor

Power
0.75–355 kW
Voltage
380 V
Duty
S1
Cooling
IC411

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

Shiyang YE5: calculate the upgrade before replacing the motor

A higher-efficiency series is useful when its energy saving, speed and installed fit match the job. Use the 22 kW example to evaluate the running-cost difference, then lock the pole count and obtain a YE5-specific drawing before ordering.

Put the YE5 upgrade on an energy budget

Compare the same 22 kW, four-pole operating point

The YE5-180L-4 row lists 95.5% efficiency at 1,480 rpm. The same manufacturer’s YE4 180L-4 table lists 94.5% at the same output and speed. At a constant 22 kW shaft output, the calculated inputs are approximately 23.04 and 23.28 kW respectively: a difference of about 0.244 kW, not a 5% reduction inferred from the series name.

An example annual saving is about 1,463 kWh

That estimate is 22 × (1/0.945 − 1/0.955) × 6,000 hours. It assumes full rated output throughout those hours and that the catalogue efficiencies apply to the supplied motors. Multiply the energy difference by the applicable electricity tariff, then compare it with the installed upgrade cost. Use measured operating hours and load distribution for a real purchase decision; partial-load performance is not established by these full-load rows.

Keep the classification claim separate from the calculation

The brochure describes the range as IE5 and cites GB 18613-2020. The calculation above uses the stated numerical efficiencies, not an independently verified efficiency certificate. Include the exact model, test method and efficiency report in the purchase specification before relying on a classification requirement.

The 22 kW alternatives do not run the same machine speed

All three examples are listed for 380 V, 50 Hz. Frame designation, current and starting-current ratio change with pole count; the common kW value alone is not a replacement specification.

YE5 catalogue modelRated speedRated currentEfficiencyStarting/rated current
180M-2 2,960 rpm 40.0 A 95.1% 9.5
180L-4 1,480 rpm 41.6 A 95.5% 9.5
200L2-6 990 rpm 44.0 A 94.9% 8.5

Turn the comparison into a replacement order

Supply and starting method

For the four-pole 22 kW row, 41.6 A × 9.5 gives approximately 395 A from the catalogue starting-current ratio. This is an arithmetic screening value, not a measured site start. Confirm the starting method, acceleration time and available supply before selecting protection or switching equipment.

A mounting label is not a dimensioned fit check

B3, B5 and B35 are listed, but the YE5 material reviewed here does not include a dimension table. Obtain the YE5 shaft, key, locating diameter, fixing pattern and overall-length drawing. Do not copy the YE4 dimensions simply because both designations contain 180L.

Keep the operating conditions attached to the quote

The overview gives IC411 self-fan cooling, S1 duty, IP55, F/B insulation/temperature-rise notation, −15 to +40°C ambient, relative humidity up to 90% and altitude up to 1,000 m. Specify deviations explicitly. The available two- and four-pole tables end at 315 kW and the six-pole table at 250 kW, although the overview mentions 355 kW; a 355 kW order needs its own confirmed row.

CATALOGUE OVERVIEW

About this motor series

Shiyang’s YE5 brochure lists 0.75–355 kW, 80–355 mm frames and enclosed self-fan-cooled construction. The stated standard supply is 380 V at 50 Hz, with IP55, IC411 cooling and S1 duty. B3, B5 and B35 mounting options are identified. The manufacturer labels the range IE5; procurement should include the exact model’s efficiency test data, particularly when replacing a motor with different pole count or mounting.

Model / series reference: YE5

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Power
0.75–355 kW
Voltage
380 V
Duty
S1
Cooling
IC411
Mounting
B3 / B5 / B35
Protection
IP55
Frame Height
80–355 mm
Product Type
YE5 three-phase induction motor
Catalogue Scope
Manufacturer model or series
Supplier-stated Efficiency
IE5
Speed
Model dependent
Manufacturer
Shiyang Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail