Z710-G DC motor

CATALOGUE OVERVIEW

About this motor series

Xianfeng’s Z710-G DC motor is designed for high-speed wire-rod rolling mills. It uses a 710 mm centre height and a laminated polygonal frame. The catalogue specifies continuous duty, separate excitation and an air-to-water cooling arrangement. Armature and field supply are different circuits and must be specified separately in a retrofit.

Model / series reference: Z710-G

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Voltage

660 / 750 V

Duty

S1

Cooling

ICW37A86

Mounting

IM1001; IM1002 variant

Insulation

Class F

Protection

IP44

Product Type

Z710-G DC motor

Centre Height

710 mm

Catalogue Scope

Manufacturer model or series

Standard Field Voltage

220 V

Standard Armature Voltage

660 / 750 V

Power

Confirm configuration

Speed

Model dependent

Manufacturer

Wuxi Xianfeng

Request current pricing, MOQ, lead time and a dimensioned drawing for the exact configuration offered. Catalogue drawings may cover several variants.

Catalogue reference

Manufacturer

Wuxi Xianfeng

Product reference

Z710-G DC motor

Source reviewed

2026-09-21

Specifications describe the manufacturer’s published catalogue. They are not a test report or a guarantee that every option can be combined.

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.