XVM-A adjustable vibration motor

CATALOGUE OVERVIEW

About this motor series

Xinlanbeike’s XVM-A is a vibration motor with adjustable eccentric weights. The published standard electrical data is 380 V, 50 Hz, three-phase, with class F insulation, IP55 protection and continuous duty. The source also describes vibration-resistant terminals and bearings selected for the operating loads.

Select a size using excitation force and vibration frequency together with the machine’s supported mass and mounting geometry. Changing the eccentric setting changes the excitation; it is not equivalent to adjusting shaft-output power. Request the model-specific force, speed, power and installation table before sizing. Special voltage and frequency variants are discussed in the catalogue but require confirmation for the supplied motor.

Model / series reference: XVM-A

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Voltage

380 V

Duty

Continuous

Phase

Three-phase

Frequency

50 Hz standard listing

Insulation

F

Protection

IP55

Ambient Temperature

−20°C to +40°C

Excitation Adjustment

From zero to maximum via eccentric weights

Power

Confirm configuration

Speed

Model dependent

Request current pricing, MOQ, lead time and a dimensioned drawing for the exact configuration offered. Catalogue drawings may cover several variants.

Catalogue reference

Manufacturer

Xinlanbeike XVM

Product reference

XVM-A adjustable vibration motor

Source reviewed

2026-09-21

Specifications describe the manufacturer’s published catalogue. They are not a test report or a guarantee that every option can be combined.

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.