XVML single-flange vertical vibration motor

CATALOGUE OVERVIEW

About this motor series

The XVML series uses a single-flange vertical arrangement for rotary screens, cleaning equipment, finishing machinery and mixing applications. Xinlanbeike publishes 220/380 V, 50 Hz, class F insulation, IP55 protection and continuous operation, with two- and four-pole parameter tables.

A vertical exciter must be matched to the screening or mixing assembly. Supply the machine mass, desired motion, flange dimensions and operating frequency when requesting a quotation. Ask for the exact eccentric configuration, excitation force and installation drawing. The mounting concept and family electrical data are documented, but the power of an individual model should be taken from its own technical table rather than inferred from the series name.

Model / series reference: XVML

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Voltage

220 / 380 V

Duty

Continuous

Poles

2 or 4 in catalogue tables

Mounting

Vertical, single flange

Frequency

50 Hz

Insulation

F

Protection

IP55

Ambient Temperature

−20°C to +40°C

Power

Confirm configuration

Speed

Model dependent

Request current pricing, MOQ, lead time and a dimensioned drawing for the exact configuration offered. Catalogue drawings may cover several variants.

Catalogue reference

Manufacturer

Xinlanbeike XVM

Product reference

XVML single-flange vertical vibration motor

Source reviewed

2026-09-21

Specifications describe the manufacturer’s published catalogue. They are not a test report or a guarantee that every option can be combined.

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.