
Application-specific motors
YZL four-pole vertical vibration motor
Zhejiang Shangzhen Motor Co., Ltd.- Power
- 1.5–11 kW
- Product Type
- YZL vertical vibration motor

Manufacturer catalogue image · Series illustration

Catalogue series · Exact configuration and availability confirmed by the manufacturer.
Zhejiang Shangzhen Motor Co., Ltd. (浙江上振电机有限公司, Linhai, Taizhou, Zhejiang) publishes one eight-pole YZO table at 380 V, 50 Hz and 720 vibrations per minute. The two tables below carry every row of that table; the notes after them show which neighbouring models share a mounting footprint and why the 80-8 and 80-8A entries are not interchangeable.
Every row is copied from the manufacturer's eight-pole table (three-phase, 380 V, 50 Hz, 720 vibrations per minute), reviewed on 29 October 2026. Dimensions A, B, H, L and the outline-drawing number are on that table; ask for the drawing of the exact suffix.
| Model | Excitation force | Rated power | Rated current | Mounting bolts | Listed mass |
|---|---|---|---|---|---|
| YZO-1.5-8 | 1.5 kN | 0.18 kW | 0.85 A | 4 × M16 | 28 kg |
| YZO-3-8 | 3 kN | 0.25 kW | 1.18 A | 4 × M20 | 60 kg |
| YZO-5-8 | 5 kN | 0.37 kW | 1.75 A | 4 × M24 | 80 kg |
| YZO-10-8 | 10 kN | 0.75 kW | 2.78 A | 4 × M30 | 120 kg |
| YZO-16-8 | 16 kN | 1.10 kW | 4.07 A | 4 × M30 | 140 kg |
| YZO-20-8 | 20 kN | 1.50 kW | 4.93 A | 4 × M36 | 182 kg |
| YZO-30-8 | 30 kN | 2.20 kW | 6.70 A | 4 × M36 | 270 kg |
| YZO-50-8 | 50 kN | 3.70 kW | 9.80 A | 4 × M42 | 370 kg |
The suffix A marks a separate base design, not a spelling variant. The two largest entries exist only as A versions.
| Model | Excitation force | Rated power | Rated current | Mounting bolts | Listed mass |
|---|---|---|---|---|---|
| YZO-63-8 | 63 kN | 4.50 kW | 11.58 A | 6 × M42 | 440 kg |
| YZO-80-8 | 80 kN | 5.50 kW | 14.15 A | 6 × M42 | 600 kg |
| YZO-80-8A | 80 kN | 5.50 kW | 14.15 A | 8 × M36 | 686 kg |
| YZO-100-8 | 100 kN | 6.30 kW | 16.60 A | 6 × M42 | 650 kg |
| YZO-100-8A | 100 kN | 6.30 kW | 16.60 A | 8 × M36 | 760 kg |
| YZO-140-8 | 140 kN | 10.00 kW | 26.05 A | 8 × M42 | 910 kg |
| YZO-160-8 | 160 kN | 12.00 kW | 31.26 A | 8 × M42 | 960 kg |
| YZO-200-8A | 200 kN | 14.00 kW | 39.86 A | 8 × M42 | 1,390 kg |
| YZO-250-8A | 250 kN | 18.00 kW | 51.40 A | 8 × M42 | 1,460 kg |
Dimensions are millimetres; A, B, H and L are the letters in the manufacturer’s installation table. This comparison highlights the differences and does not replace the complete outline drawing.
| Catalogue field | YZO-80-8 | YZO-80-8A |
|---|---|---|
| Rated excitation force | 80 kN | 80 kN |
| Rated power / current | 5.50 kW / 14.15 A | 5.50 kW / 14.15 A |
| A / B mounting dimensions | 460 / 140 mm | 540 / 340 mm |
| H dimension | 250 mm | 260 mm |
| L dimension | 770 mm | 910 mm |
| Installation fasteners | 6 × M42 | 8 × M36 |
| Listed mass | 600 kg | 686 kg |
Both rows list A 310, B 170, H 160 and L 520 mm with four M30 bolts; only force (10 vs 16 kN), power and mass (120 vs 140 kg) differ. On paper the 16 kN unit fits the same base.
YZO-100-8 repeats the 80-8 base (A 460, B 140, H 250, six M42 bolts) with L 810 instead of 770 mm. YZO-160-8 repeats the 140-8 base (A 600, B 120, eight M42) with L 1,040 instead of 1,000 mm. Check end clearance and cable entry before treating them as swaps.
A higher-force motor on the same base changes stroke, bearing load and stress in the screen or feeder body. Ask the machine builder to approve any force increase; the motor table cannot confirm that the structure is rated for it.
Both entries can satisfy the same nominal force request, but the machine builder must approve the installed arrangement. The 86 kg difference is part of that review, not a prediction of vibration performance.
Measure the base against the 460 × 140 mm A/B dimensions and the six-fastener pattern. An 80-8A offer requires a separate mechanical assessment: its 540 × 340 mm dimensions and eight smaller fasteners do not reproduce that interface.
Check the complete suffix, A/B dimensions and eight M36 fasteners. Do not confuse the 340 mm B dimension with the 260 mm H dimension. The supplier’s current outline drawing must confirm the remaining dimensions, access and clearances.
Provide moving-assembly mass, material load, intended motion and the number and position of exciters to the machine designer. Ask for the approved force, pole group and support arrangement before selecting an entry. Include that arrangement and the complete motor reference in the inquiry.
The table reviewed here is marked three-phase, eight-pole, 380 V, 50 Hz and 720 vibrations per minute. Zhejiang Shangzhen publishes its other pole groups separately.
The force column is in kN; the power column is in kW. An existing machine needs the specified excitation force and vibration frequency as well as an electrically suitable motor. Selecting a larger kW entry alone does not establish the intended motion.
Use the existing nameplate and machine drawing together. YZO-80-8A is a separate table entry from YZO-80-8, not a spelling variant. The dimensions below explain why a quotation that omits the final A is incomplete.
CATALOGUE OVERVIEW
Shangzhen’s eight-pole YZO table specifies three-phase 380 V, 50 Hz and a vibration speed of 720 rpm. Its rows span 1.5–250 kN excitation force and 0.18–18 kW. The YZO-20-8 row pairs 20 kN with 1.5 kW and 4.93 A; its mounting table gives A=350 mm, B=220 mm and four M36 mounting fasteners.
Check the complete suffix before replacing a unit. The table includes both YZO-80-8 and YZO-80-8A at 5.5 kW, but their listed B dimensions differ, 140 versus 340 mm. The four-, six- and eight-pole groups cannot be selected by power alone; match force, speed, support structure and the exact mounting drawing.
Model / series reference: YZO
Specifications describe a series range; confirm which ratings apply together to the quoted model.
Confirm mounting and shaft dimensions against the drawing for the quoted configuration.
Keep your sourcing team on the same page.
We use cookies to keep this site working and measure website usage. Cookie & privacy details