MOTOR MANUFACTURER · Zhejiang, CHINA

Mige Motor

Hangzhou Mige Motor publishes separate servo, stepper and machine-tool spindle lines. That distinction matters more than a broad power range: a positioning axis needs a matched drive and feedback, while a spindle needs its own speed-power and cooling envelope. Its 40A servo sheet illustrates why full winding codes matter: two 50 W/3000 rpm variants have the same 0.16 N·m rated torque but different 48 V and 220 V windings and different peak-torque figures. Treat those values as 40A examples, not as specifications for every Mige servo.

LocationZhejiang, China
Published catalogue3 product series
Motor families3 represented

HANGZHOU MIGE · MOTION-CONTROL MOTORS

Mige Motor: choose servo, stepper or spindle drive by axis duty

Explore the published range ↓

01 / MATCH THE MOTION TASK

Positioning, stepping and cutting spindles are separate purchases

Servo for a controlled positioning axis

Mige groups its AC servo products into A, B, E and N families. A CNC feed or packaging axis needs the selected motor and drive to meet acceleration torque, load inertia, speed, feedback and stopping requirements as a system. The 40A sheet is one verified small-frame example; a 40A's peak torque or winding choice cannot be transferred to a larger B-series machine simply because both are called servo motors.

Confirm before ordering Send motion profile, reflected load inertia, gearbox ratio, required positioning error, peak and continuous torque, rated bus/drive voltage, encoder type, brake and connector requirements. Request the exact motor-drive pairing list, torque-speed curve and full ordering code.

View Industrial AC servo motor range →

Stepper when pulse positioning fits the load

The maker separately lists two-phase, two-phase closed-loop and three-phase steppers; the visible categories include 42, 57, 86 and 110 references in the two-phase line. A frame reference does not specify phase current or holding torque, and holding torque does not show usable torque at operating speed. Choose open-loop only after allowing for missed-step risk; closed-loop variants add feedback and a different driver/wiring task.

Confirm before ordering Provide speed range, move distance, acceleration, load inertia, holding duty, acceptable lost-step risk, installation envelope and driver bus/current. Obtain the selected motor's torque-speed curve at the intended driver setting and the connector/feedback drawing.

View Industrial stepper motor range →

Spindle motor for continuous cutting power

The separate spindle catalogue lists 165Y, 180H, 204Y, 204YJ and 265Y families. A spindle request is governed by base speed, constant-power range, thermal duty, bearing load and tool-interface constraints rather than the 40A servo table or stepper holding-torque convention. The listing alone does not establish a common rating across these five families.

Confirm before ordering Send cutting process, spindle/tool interface, operating speed band, required continuous power and short-time overload, cooling medium, bearing orientation, runout tolerance and drive/encoder scheme. Ask for the exact model's rating curve, mechanical drawing and acceptance limits.

View Machine-tool spindle motor range →

02 / READ THE MODEL ROW, NOT ONLY THE WATTS

One 40A frame can hide a different winding and peak response

50 W at 48 V versus 220 V

The manufacturer's 40A specification image shows 40AST-M00130 at 50 W and 3000 rpm in two winding versions. Both list 0.16 N·m rated torque. The 48 V row lists 1.1 A and 0.48 N·m peak, while the 220 V row lists 0.4 A and 0.32 N·m peak. A request for '50 W 40A' is therefore insufficient to select the drive and overload behaviour.

100 W is another model and two more windings

The same sheet labels 40AST-M00330 as 100 W, 3000 rpm and 0.32 N·m rated torque. Its 48 V and 220 V rows show different rated currents and peak torque. These values establish only the illustrated 40A variants; they do not define the continuous operating envelope of every A-series motor or any B/E/N family.

Company-wide statistics on its sites do not agree

Mige's current homepage says the company began in 2005 but also displays a separate '1985' founding marker; current and older company pages disagree on patent count. This profile therefore does not use either founding marker or a patent total as a buyer-facing quality signal. The product-family navigation and 40A row-level sheet are the evidence used for selection.

03 / GET A SYSTEM-LEVEL ANSWER

Make a sample test possible before approving a motor substitution

A motor-family name cannot establish axis performance. Request the exact winding, drive, feedback and mechanical interface, then test the axis under the actual machine duty.

Document the axis and present failure

Describe CNC feed, textile indexer, packaging register or spindle service; include the present motor/drive label, cycle diagram, inertia, acceleration, gear ratio, operating speed, supply, ambient and mounting drawing. State whether the problem is heat, missed position, resonance, peak demand or lead-time replacement.

Request a matched bill of materials

Ask for one motor code, winding voltage, compatible drive part number/firmware, feedback protocol, brake, cables/connectors and tuning parameters. For a stepper, add operating-speed torque at the proposed current; for a spindle, add continuous/short-time curves and cooling/encoder arrangement.

Accept by repeatable measurement

On the actual load, record peak/continuous current, position error or lost steps, cycle time, winding and drive temperature, vibration, noise and stopping performance. Compare the same duty profile after warm-up and keep the approved drawing, parameter file and test result with the order.

Published motor range

3 series

Company information

Company name
Hangzhou Mige Elec.&Mach. Co., Ltd.
Chinese registered name
杭州米格电机有限公司
Region
Zhejiang, China
Record updated
2026-10-07

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail