AIRE / AIRE2 GOST single-phase induction motor

Manufacturer catalogue image · Series illustration

AC induction motors

AIRE / AIRE2 GOST single-phase induction motor

Product Type
GOST single-phase induction motor
Catalogue Scope
Manufacturer model or series
AIRE-71B Lengths
262 mm two-pole; 278 mm four-pole
Catalogue Groups
AIRE permanent-capacitor; AIRE2 two-capacitor

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

AIRE or AIRE2: match the starting circuit and leave room for the longer build

The GOST single-phase catalogue separates permanent-capacitor AIRE motors from two-capacitor AIRE2 motors. Frame 71B illustrates the replacement trap: both groups share key mounting dimensions, but the AIRE2 outline is longer. Check the starting load before deciding that a matching shaft is enough.

Frame 71B has four relevant outlines, not one

Dimensions are in millimetres. These rows share shaft diameter D = 19, extension E = 40, key width F = 6, centre height 71 and foot spacing A × B = 112 × 90. The overall length still changes with circuit family and pole count.

FamilyCircuitPolesOverall LDifference from matching AIRE
AIRE-71B Permanent capacitor 2 262 Reference
AIRE2-71B Two capacitors 2 306 44 mm longer
AIRE-71B Permanent capacitor 4 278 Reference
AIRE2-71B Two capacitors 4 322 44 mm longer

Use the load at start to select the circuit

The permanent-capacitor 71B2 entry has a modest starting-torque ratio

The AIRE-71B2 row lists 0.75 kW, 220 V, 2780 rpm and 5.2 A. Its starting-current ratio is 4 and starting-torque ratio is 0.4. The current ratio implies about 20.8 A at start; it is not a protection setting. The low torque ratio is a reason to check breakaway load, rather than assuming the motor will start a loaded machine because its running kW matches.

Do not transfer that row into an AIRE2 quotation

The two-capacitor family has its own starting arrangement and outline. Ask for the selected AIRE2 winding’s performance sheet, start/run capacitor values and voltage ratings, and the starting-device specification. The permanent-capacitor table is not evidence of the two-capacitor version’s torque or current.

For a flange-mounted replacement, include the locating fit

The 71B dimensional rows give flange P = 200, pitch circle M = 165, register N = 130 and hole S = 12. Mark the required B3 foot-only or B35 foot-and-flange arrangement. Compare the full interface drawing and tolerances with the driven unit; a GOST frame name alone does not establish interchangeability with an IEC motor.

Give the supplier the information that changes the selection

Send the existing nameplate, capacitor labels, mounting photographs, available axial clearance and supply conditions. Explain whether the machine starts unloaded, how often it restarts and whether reversal is required. Obtain the actual winding connection diagram; do not move terminal links by analogy with a three-phase motor or another capacitor configuration.

CATALOGUE OVERVIEW

About this motor series

Dafeng’s GOST single-phase range distinguishes AIRE permanent-capacitor motors from AIRE2 two-capacitor versions. The dimensional sheet includes B3 foot-mounted and B35 foot-and-flange arrangements. In the permanent-capacitor group, AIRE-56B is shown with a 56 mm centre height, an 11 mm shaft diameter and a 23 mm shaft extension; overall length is 206 mm.

The mounting suffix and starting circuit both matter in a replacement. The AIRE-71B two-pole and four-pole entries share a 19 mm shaft but have different overall lengths, 262 and 278 mm. Specify the capacitor arrangement, pole count and drawing dimensions before comparing an AIRE motor with a similarly numbered IEC frame; the source does not establish universal interchangeability.

Model / series reference: AIRE / AIRE2

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Product Type
GOST single-phase induction motor
Catalogue Scope
Manufacturer model or series
AIRE-71B Lengths
262 mm two-pole; 278 mm four-pole
Catalogue Groups
AIRE permanent-capacitor; AIRE2 two-capacitor
Mounting Drawings
B3 / B35
AIRE-56B Shaft D/E
11 / 23 mm
AIRE-56B Centre Height
56 mm
AIRE-56B Overall Length
206 mm
Power
Confirm configuration
Voltage
Confirm supply
Speed
Model dependent
Manufacturer
Dafeng Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail