AIR two-pole three-phase induction motor

Manufacturer catalogue image · Series illustration

AC induction motors

AIR two-pole three-phase induction motor

Power
0.09–315 kW
Voltage
220–380 / 380–660 V
Output Range
0.09–315 kW
Product Type
GOST three-phase induction motor

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

Moving from AIR-112M2 to AIR-132M2 changes both the winding and the machine interface

A 7.5-to-11 kW uprating in this two-pole catalogue is not a like-for-like replacement. The voltage pair changes at the same point as the shaft diameter, centre height, foot spacing and motor length. Check the electrical and mechanical changes together before ordering.

The two catalogue entries on either side of the voltage change

These are the IE1-labelled AIR entries, not values from the separate AIR-IE2 catalogue. Paired currents follow the order of the paired voltages. They are alternatives for the specified winding connection, not a continuous permissible voltage range.

SpecificationAIR-112M2AIR-132M2
Rated output 7.5 kW 11 kW
Rated speed 2890 rpm 2900 rpm
Voltage pair 220 / 380 V 380 / 660 V
Current pair 27 / 15.3 A 21.8 / 12.4 A
Listed efficiency 86.0% 87.6%
Starting current / rated current 7.5 7.5
Starting torque / rated torque 2.2 2.2

What has to change around the larger motor

Coupling bore and centrelineThe AIR-112M outline specifies a 32 mm shaft and 112 mm centre height; AIR-132M specifies 38 mm and 132 mm. Both list an 80 mm shaft extension. An unchanged extension length does not make the coupling reusable: the bore changes by 6 mm and the shaft centreline rises by 20 mm.
Baseplate and axial clearanceThe foot-hole centres A × B change from 190 × 140 mm to 216 × 178 mm. Overall length increases from 460 to 530 mm. Check the baseplate, alignment adjustment and fan-end clearance against the delivered drawing; the listed length alone does not include a maintenance allowance.
Flange locating fitThe drawing lists pitch circle M / register N / hole S as 265 / 230 / 15 mm for AIR-112M and 300 / 250 / 19 mm for AIR-132M. A flange-mounted machine therefore needs a separate fit check, even if a new coupling and baseplate have already been arranged.

Resolve the supply and starter before approving the uprating

Select the correct current for the actual supply

At the listed 380 V condition, the two entries are 15.3 A and 21.8 A respectively. Applying the catalogue starting-current ratio gives approximately 114.8 A and 163.5 A. These are calculated catalogue-ratio examples, not breaker settings or a prediction of the complete acceleration transient.

Do not reuse the old terminal-link arrangement by appearance

The voltage pair changes from 220/380 to 380/660 V. Obtain the selected motor’s nameplate and terminal diagram and check them against the supply, starter and accessible winding leads. A starter appropriate to one voltage pair is not automatically appropriate to the other. State whether the load starts coupled and provide its acceleration requirement.

Quote the exact catalogue version and destination requirement

Keep AIR-IE1 and AIR-IE2 quotations separate. Supply the required efficiency class and destination rules with the enquiry, and request the corresponding model-specific documentation. The GOST category, a catalogue logo or the IE1 table is not evidence of current market approval for a different motor.

CATALOGUE OVERVIEW

About this motor series

Dafeng’s GOST-oriented AIR (АИР) catalogue includes a two-pole rating table from 0.09 to 315 kW. The low-output rows use 220/380 V windings, while the table switches to 380/660 V from AIR-132M2 at 11 kW. Rated speeds span 2650–2980 rpm across the listed models.

A 7.5 kW AIR-112M2 entry is listed at 2890 rpm, whereas the 11 kW AIR-132M2 is 2900 rpm and uses the higher voltage pair. Confirm the individual frame drawing and winding connection when replacing a motor. The sheet carries an IE1 label; do not interpret the GOST catalogue category as proof that a particular model meets current efficiency rules in the destination market.

Model / series reference: AIR

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Power
0.09–315 kW
Voltage
220–380 / 380–660 V
Output Range
0.09–315 kW
Product Type
GOST three-phase induction motor
Catalogue Scope
Manufacturer model or series
Rated Speed Range
2650–2980 rpm
Reviewed Subfamily
AIR (АИР), two-pole
Winding Transition
380/660 V from AIR-132M2, 11 kW
Source Efficiency Label
IE1
Speed
Model dependent
Manufacturer
Dafeng Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail