IE3 aluminium-housing three-phase induction motor

Manufacturer catalogue image · Series illustration

AC induction motors

IE3 aluminium-housing three-phase induction motor

Power
0.75–18.5 kW
Frequency
50 Hz
Product Type
IE3 aluminium-housing three-phase induction motor
Example Model
IE3-90S-2: 1.5 kW; 2895 rpm; 4.95 Nm

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

Choose the IE3 flange by its locating fit and holes, not by shaft diameter alone

Deli’s IE3 frames 100L and 112M share a 28 × 60 mm shaft and the same listed flange interfaces. However, the B14 and B5 options have different registers, bolt circles and fixing holes. A matching coupling bore therefore answers only one part of the replacement question.

The B14 and B5 interfaces for frames 100L and 112M

Dimensions are in millimetres unless identified as a thread. These values come from the IE3 outline sheet, not the YEJ2 brake-motor drawing. The B14 drawing uses threaded fixing holes; the B5 drawing uses through holes.

Interface featureB14B5
Pitch circle M 130 215
Register diameter N 110 180
Outer flange diameter P 160 250
Fixing hole S M8 thread 15 mm through hole
Register projection T 3.5 4.0
Shaft diameter D / extension E 28 / 60 28 / 60
Shaft key width F 8 8

A common flange does not make 100L and 112M identical motors

Foot alignment and body clearance still changeThe IE3 outline gives centre heights of 100 and 112 mm, transverse foot centres A of 160 and 190 mm, and overall lengths of 392 and 406 mm for 100L and 112M. Their axial foot spacing B is 140 mm. Where feet are part of the selected arrangement, check the baseplate and centreline instead of relying on the common flange dimensions.
The full model suffix selects the ratingAt 50 Hz, IE3-100L1-4 is listed at 2.2 kW, 1435 rpm and 14.6 N·m; IE3-100L2-4 is 3 kW, 1435 rpm and 20 N·m. The 112M four-pole entry is 4 kW, 1440 rpm and 26.5 N·m. A request for “100L B14” alone omits the winding/rating distinction between the first two entries.
Check the fastener engagement, not just the thread nameFor B14, request usable thread depth and the mating component’s thickness before choosing bolt length. The catalogue specifies M8 but does not provide engagement depth. For B5, confirm the mating through-hole pattern, register fit and access for the specified fasteners. Send the driven-unit drawing with the selected mounting code.

Tie the electrical confirmation to the same order code

Use the clearly identified supply column

For the 2.2 kW 100L1-4, 3 kW 100L2-4 and 4 kW 112M-4 examples, the 380 V current column lists 4.93, 6.66 and 8.56 A respectively. State the actual supply voltage and frequency in the RFQ and obtain the matching nameplate and connection diagram.

Resolve the two ambiguous headings before an energy comparison

The current headers read 380, 450 and 415; the middle value is not silently changed to 400 here. The part-load efficiency heading also has a Chinese 50% label paired with English text saying 75%. Request a corrected model sheet before using those columns in an energy or current calculation. A catalogue efficiency label alone does not establish approval under the destination’s current requirements.

CATALOGUE OVERVIEW

About this motor series

Deli’s IE3 table lists 0.75–18.5 kW two-pole motors, 0.75–15 kW four-pole motors and 0.75–11 kW six-pole motors at 50 Hz. The IE3-90S-2 row gives 1.5 kW, 2895 rpm and 4.95 Nm. Efficiency and current must be compared at the same rating and load, rather than taking one value for the whole family.

The image labels its current columns 380, 450 and 415. Confirm the intended middle voltage with Deli before using its current figures.

Model / series reference: IE3

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Power
0.75–18.5 kW
Frequency
50 Hz
Product Type
IE3 aluminium-housing three-phase induction motor
Example Model
IE3-90S-2: 1.5 kW; 2895 rpm; 4.95 Nm
Catalogue Scope
Manufacturer model or series
Six-pole Output
0.75–11 kW
Two-pole Output
0.75–18.5 kW
Four-pole Output
0.75–15 kW
Voltage
Confirm supply
Speed
Model dependent
Manufacturer
Deli Electric Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail