DL-PG-PS IC410 permanent-magnet synchronous gearmotor

Manufacturer catalogue image · Series illustration

Geared motors

DL-PG-PS IC410 permanent-magnet synchronous gearmotor

Power
0.37–4 kW
Voltage
220 / 380 V
Duty
S3 40%
Product Type
DL-PG-PS IC410 permanent-magnet synchronous gearmotor

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

DL-PG-PS IC410: two 0.75 kW choices can deliver very different geared outputs

Dongling’s planetary PM gearmotor table separates motor speed, reduction ratio and output torque. A 0.75 kW selection can be a DL90L unit running at 375 rpm or a smaller DL71M unit running at 750 rpm. They are not equivalent replacements: with the same ratio, the faster motor gives twice the output speed but a different torque allowance and installation envelope.

First decide whether the drive cycle fits S3 40%

This table is for intermittent duty

The published working-system entry is S3 40%. It should not be read as an S1 continuous-duty rating. Provide the actual loaded interval, rest interval and repeated cycle, including starts and reversals. A requested 40% operating fraction alone does not define the complete thermal duty.

Match the PM control and cooling configuration

The source identifies a position-sensorless three-phase permanent-magnet motor using a PM vector inverter, with IC410 self-cooling and class F insulation. Ask for the matched inverter settings and the selected winding connection at 220 or 380 V. Do not assume that an ordinary induction-motor drive configuration or a different cooling variant preserves the tabulated output.

Compare complete 0.75 kW rows at the required output speed

The entries below are transcribed from the motor/ratio table. The model suffix identifies motor rpm, not geared-output rpm. For each model, keep the ratio, output speed and torque together.

Motor / motor rpmRatioOutput rpmOutput torqueListed weight
DL90L-PG-PS10-375 / 375 rpm 5 75 95 N·m 15.1 kg
DL90L-PG-PS10-375 / 375 rpm 12 31.25 220 N·m 16.2 kg
DL90L-PG-PS10-375 / 375 rpm 20 18.75 370 N·m 16.2 kg
DL71M-PG-PS10-750 / 750 rpm 5 150 45 N·m 8 kg
DL71M-PG-PS10-750 / 750 rpm 12 62.5 110 N·m 8.6 kg
DL71M-PG-PS10-750 / 750 rpm 20 37.5 180 N·m 8.6 kg

The smaller motor also changes the coupling and mounting

Shaft and foot mounting

The 71M dimension row lists a 19 mm shaft diameter, 40 mm shaft extension and 112 × 90 mm foot-hole pitches. The 90L row instead lists a 24 mm shaft, 50 mm extension and 140 × 125 mm pitches. These are physical replacement differences; keeping “0.75 kW” and the same reduction ratio will not preserve the coupling or base.

Flange mounting and length

For IMB5, the 71M row gives a 130 mm bolt circle, 110 mm register and 160 mm flange outside diameter. The 90L values are 165, 130 and 200 mm. The table’s L dimension is 216 mm for 71M and 266 mm for 90L. Request the final drawing for the selected ratio and mounting, because the dimension table is grouped by frame rather than repeating every ratio combination.

Keep the current check tied to the chosen winding

For the 0.75 kW DL90L-375 row the source lists 3.5 A at 220 V and 2.0 A at 380 V; for the 0.75 kW DL71M-750 row it lists 3.3 A and 1.9 A. Use the offered winding’s confirmed rating when configuring the drive. The separate 4 kW, 220 V table entry is inconsistent and should not be used to extrapolate current for this family.

CATALOGUE OVERVIEW

About this motor series

Dongling’s DL-PG-PSIC410 gearmotor table pairs 0.37–4 kW motor ratings with reduction ratios of 5, 12 and 20. The motor-side speed groups are 375, 750 and 1000 rpm; the corresponding output speeds span 18.75–200 rpm. These entries use three-phase 220/380 V supplies and S3 40% intermittent duty. Select the motor rating, ratio and output torque as one table row; the duty rating is not continuous S1 operation.

The 4 kW row contains an inconsistent 220 V current value. Current is withheld pending a corrected manufacturer sheet.

Model / series reference: DL-PG-PS

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Power
0.37–4 kW
Voltage
220 / 380 V
Duty
S3 40%
Product Type
DL-PG-PS IC410 permanent-magnet synchronous gearmotor
Catalogue Scope
Manufacturer model or series
Reduction Ratios
5 / 12 / 20
Motor Speed Groups
375 / 750 / 1000 rpm
Gearbox Output Speed
18.75–200 rpm; configuration-dependent
Tabulated Motor Output
0.37–4 kW
Speed
Model dependent
Manufacturer
Dongling Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail