YE4 three-phase induction motor

CATALOGUE OVERVIEW

About this motor series

Hengshui Electric Motors publishes YE4 three-phase induction motors with model-table outputs from 0.55 to 315 kW. The table separates two-, four-, six- and eight-pole configurations, with model-specific current, speed, efficiency, power factor and starting-performance values. The catalogue states IC411 cooling, IP55 protection and class F insulation. Select the exact frame and pole count before comparing performance: the series range does not describe a single motor or guarantee every output in each configuration.

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Power

0.55–315 kW

Voltage

380 V

Cooling

IC411

Altitude

Up to 1,000 m

Frequency

50 Hz

Insulation

Class F

Protection

IP55

Ambient Temperature

-15°C to +40°C

Speed

Model dependent

Selection

Specify supply, duty and mounting with your inquiry

Manufacturer

Hengshui Electric Motors

Catalogue Type

Product series

Not stated in the collected source: exact price, MOQ, lead time, model-specific dimension drawing. Request these with your selected configuration.

Selection priorities for AC induction motors

Supply frequency and pole count determine the available speed range. Confirm efficiency at the required load and whether the chosen model is suitable for inverter operation.

• Rated output and duty
• Voltage, phase and frequency
• Pole count and rated speed
• IEC frame and mounting
• Efficiency class and enclosure

Use the YE4 three-phase induction motor reference when requesting a datasheet from Hengshui Electric Motors. Confirm these requirements against the exact offered model before comparing quotations.

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.