Tumble dryer motor

CATALOGUE OVERVIEW

About this motor series

Nanyang's dryer catalogue separates AC, BLDC and centrifugal-switch motor configurations. The published BLDC column lists 1/5 HP, 0.53 Nm, class F insulation, 18 stator poles and 8 or 10 rotor poles. The other columns have different ratings and should not be combined into one model specification.

The product introduction discusses variable-speed tumble-dryer applications up to 15 kg. Identify the exact configuration, drum and fan drive arrangement, supply and controller interface before requesting a quotation. Ask for a model-specific power rating in watts, speed range and shaft drawing; the catalogue's general speed claims do not apply automatically to every column in its table.

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Power

Confirm configuration

Voltage

Confirm supply

Speed

Model dependent

Selection

Specify supply, duty and mounting with your inquiry

Manufacturer

Nanyang Motor

Catalogue Type

Product series

Not stated in the collected source: exact price, MOQ, lead time, model-specific dimension drawing. Request these with your selected configuration.

Selection priorities for AC induction motors

Supply frequency and pole count determine the available speed range. Confirm efficiency at the required load and whether the chosen model is suitable for inverter operation.

• Rated output and duty
• Voltage, phase and frequency
• Pole count and rated speed
• IEC frame and mounting
• Efficiency class and enclosure

Use the Tumble dryer motor reference when requesting a datasheet from Nanyang Motor. Confirm these requirements against the exact offered model before comparing quotations.

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.