Y2-355-2 185kW high-voltage induction motor

CATALOGUE OVERVIEW

About this motor series

Wangpai advertises this Y2-355-2 as a 185 kW, 6000 V, two-pole high-voltage motor. The compact cast-iron family uses IC411 cooling, IP55 protection and foot mounting. The manufacturer specifies a directional axial fan for two-pole versions, so rotation direction must be agreed before ordering. The listing headline gives 2980 rpm, whereas the associated Y2-3551-2 table row gives 2985 rpm; confirm the final nameplate speed and full model suffix.

The headline and detailed row differ in speed and model suffix; 185 kW is retained, but the two speed values are not merged.

Model / series reference: Y2-355-2

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Power

185–185 kW

Voltage

6000 V

Cooling

IC411

Mounting

IMB3

Protection

IP55

Rated Speed

2980 rpm

Product Type

Y2-355-2 185kW high-voltage induction motor

Catalogue Scope

Manufacturer model or series

Supply Frequency

50 Hz

Advertised Output

185 kW

Rotation Requirement

Directional fan on two-pole versions

Speed

Model dependent

Manufacturer

Wangpai Motor

Request current pricing, MOQ, lead time and a dimensioned drawing for the exact configuration offered. Catalogue drawings may cover several variants.

Catalogue reference

Manufacturer

Wangpai Motor

Product reference

Y2-355-2 185kW high-voltage induction motor

Source reviewed

2026-09-21

Specifications describe the manufacturer’s published catalogue. They are not a test report or a guarantee that every option can be combined.

The headline and detailed row differ in speed and model suffix; 185 kW is retained, but the two speed values are not merged.

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.