Z4 DC motor

Manufacturer catalogue image · Series illustration

DC motors

Z4 DC motor

Insulation
Class F
Product Type
Z4 DC motor
Basic Enclosure
IP21S
Catalogue Scope
Manufacturer model or series

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

A vertical Z4 replacement needs the mounting code, not just the frame size

Haze lists different frame limits for the Z4’s foot, flange and vertical arrangements. A frame offered horizontally is not automatically listed in every vertical form. The mounting menu below is useful before committing to a replacement in a confined machine bay.

Where the published mounting choices stop

The ranges refer to mounting availability in the manufacturer’s illustrated Z4 catalogue, not shaft or flange dimensions.

ArrangementListed frames
IMB3 — horizontal, foot-mounted Z4-100 through Z4-450
IMB35 — horizontal, foot and flange Z4-100 through Z4-315
IMV1 — vertical flange arrangement Z4-100 through Z4-225
IMV15 — vertical foot-and-flange arrangement Z4-100 through Z4-315

The feet still matter in the vertical flange version

For a Z4-250 or Z4-315 installation, the catalogue lists IMV15 but stops IMV1 at Z4-225. That distinction rules out assuming the two vertical codes are interchangeable ordering descriptions. It does not prove that an unlisted custom design is impossible; it means the standard menu is not evidence for one.

Even within the IMV1 range, Haze says the machines are delivered with feet. A replacement mounted through its flange still needs physical space for those feet. A machine bay drawn around a smooth cylindrical motor body can therefore have an interference problem despite an apparently suitable frame and flange designation.

Foot-mounted replacements have a separate exception. Haze’s dimensional statement follows IEC72 except for the axial distance between the foot holes, labelled B. Matching frame height alone therefore does not establish that the old base bolts line up. No B dimension or shaft-fit dimension is supplied by the mounting menu, so it cannot be used as a drilling drawing.

Leave space for the cooling arrangement as well as the motor body

The basic cooling arrangement is IC06 with an attached external blower. IC17 uses a ducted air inlet and a louvred outlet; IC37 ducts both inlet and outlet. These are different installation envelopes. A vertical-mounting decision has to accommodate the actual air connections rather than treating the catalogue motor outline as the complete installed space.

The blower is also an auxiliary AC motor: the catalogue specifies three-phase, two-pole, 380 V fan motors. For a Z4-180, the cooling table lists a 1.1 kW fan motor. In the separate Z4-180-31 ordering example, the main DC motor is 37 kW, 440 V, 1000 rpm with 180 V separate excitation. Those numbers describe different circuits and outputs; the 1.1 kW fan value is not a lower-power Z4-180-31 option.

This catalogue is enough to separate the mounting and cooling configurations before requesting a fitted replacement. It does not include the complete dimensioned outline for each combination. The remaining fit decision is the actual flange, foot-hole B dimension and blower or duct clearance of the offered assembly.

CATALOGUE OVERVIEW

About this motor series

Haze’s Z4 is a laminated-frame DC motor range for rectifier-fed industrial drives, including rolling mills, machine tools and paper or plastics machinery. The catalogue combines several mounting forms with attached-blower or ducted cooling configurations. Their installation envelopes differ even when the frame designation matches.

Model / series reference: Z4

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Insulation
Class F
Product Type
Z4 DC motor
Basic Enclosure
IP21S
Catalogue Scope
Manufacturer model or series
Cooling Options
IC06 / IC17 / IC37
Example Mounting
IMB3
Catalogue Example
Z4-180-31: 37 kW, 440 V, 1000 rpm
Example Excitation
Separate, 180 V
Power
Confirm configuration
Voltage
Confirm supply
Speed
Model dependent
Manufacturer
Haze Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail