90 W speed-control AC gearmotor

Manufacturer catalogue image · Series illustration

Geared motors

90 W speed-control AC gearmotor

Power
0.09 kW
Voltage
Single-phase 220 V
Duty
Continuous
Poles
4

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

CATALOGUE OVERVIEW

About this motor series

Oubang lists this 90 W speed-control AC gearmotor for compact machinery, including mask-production equipment. Its installation guidance calls for adequate ventilation, correct wiring and use within the gearbox and motor nameplate ratings. For single-phase operation, the source instructs users to stop the motor before changing direction.

The accompanying table identifies the 5IK90RGN-CF speed-control version at single-phase 220 V and 0.64 A, with motor speed ranges of 90–1,300 rpm at 50 Hz and 90–1,600 rpm at 60 Hz. These are motor speeds before the reduction gearbox; output speed depends on the selected ratio. Ask for the motor, gearbox and speed-control unit as a matched configuration. Include the required output torque, available space, duty cycle and machine supply. Where lubricant leakage could affect the process, discuss installation provisions with the supplier. Confirm the exact wiring and thermal-protection behaviour before commissioning.

Model / series reference: 5IK90RGN-CF

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Power
0.09 kW
Voltage
Single-phase 220 V
Duty
Continuous
Poles
4
Assembly
AC motor with reduction gearbox
Frequency
50 / 60 Hz
Motor Mass
3.5 kg, gearbox excluded
Application
Compact machinery and mask-production equipment
Rated Power
90 W catalogue product
Rated Current
0.64 A
Motor Speed Range
90–1,300 rpm at 50 Hz / 90–1,600 rpm at 60 Hz, before gearbox
Reversal Guidance
Stop the single-phase motor before changing direction
Speed
Model dependent

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Catalogue reference

Manufacturer
Oubang Motor
Product reference
90 W speed-control AC gearmotor
Source reviewed
2026-09-21

Ask for the current datasheet and dimensioned drawing with your inquiry.

Selection guidance for Geared motors
  • Output torque and speed
  • Gear ratio and efficiency
  • Service factor and duty
  • Shaft loads and mounting
  • Gearbox lubrication
Compare this motor family →

Prepare your inquiry

Include the selected series and your operating requirements.

Build your motor RFQ brief →

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail