Horizontal gearmotor with 1:3–1:200 ratio

Manufacturer catalogue image · Series illustration

Geared motors

Horizontal gearmotor with 1:3–1:200 ratio

Power
0.1–3.7 kW
Product Type
Horizontal gearmotor with 1:3–1:200 ratio
Catalogue Scope
Product family / configuration confirmed on inquiry
Reduction Ratio
1:3–1:200

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

A 0.75 kW horizontal gearmotor can need three different mounting envelopes

Zhibao’s dimensional schedule pairs motor power and reduction ratio with a gearbox type. Several ratio ranges overlap, so power and ratio alone do not fix the shaft or footprint. Identify the gearbox type before modifying the machine base or ordering a coupling.

Compare the actual 0.75 kW mounting choices

Dimensions below follow the catalogue drawing: A is overall length, S output-shaft diameter, P shaft extension, E transverse fixing spacing and D longitudinal fixing spacing. Values are in millimetres; the type number is part of the required selection.

Type / listed ratioA lengthS / P shaftE × D fixing spacingFour fixing holes H
28 / 5–25 and 30–100 382 28 / 45 140 × 90 12
32 / 30–120 418 32 / 55 170 × 130 13
40 / 125–200 465 40 / 65 210 × 150 15

Resolve the overlapping ratios before accepting the quotation

A 1:50 order still leaves type 28 or type 32 to resolve

Both 0.75 kW schedules include 1:50. Choosing type 32 instead of type 28 adds 36 mm to overall length, changes the shaft from 28 to 32 mm and moves the fixing pattern from 140 × 90 to 170 × 130 mm. The page supplies a dimensional table, not an allowable-torque or bearing-load table. Ask the supplier to select the type against the actual output torque, operating cycle and radial/axial load, then confirm that type on the order.

Coupling and key dimensions move with the shaft

For types 28, 32 and 40, the drawing’s W key-width callouts are 7, 10 and 10 mm respectively; P shaft extensions are 45, 55 and 65 mm. The shaft diameter is marked h6 on the drawing. Check coupling bore, key fit and engagement length against the selected assembly instead of reusing the old coupling based on motor kW.

Check the power-specific ratio coverage

The family heading advertises 1:3–1:200, but the dimensional schedule reviewed here starts at 1:5. Its 2.2 kW rows stop at 1:120 and its 3.7 kW rows at 1:100. These omissions do not establish that other combinations are impossible; they mean an order outside those rows needs a separate confirmed drawing and performance rating.

State the supply and required output speed explicitly

The page distinguishes three-phase 0.1–3.7 kW and single-phase 0.1–0.75 kW ranges. It does not assign a loaded output speed, voltage or allowable output torque to every dimensional row. Include the site voltage and frequency, required shaft rpm, continuous and peak torque, and starts per hour with the chosen mounting envelope. Do not treat ideal input-speed divided by ratio as a guaranteed loaded speed.

CATALOGUE OVERVIEW

About this motor series

Zhibao’s horizontal gearmotor catalogue separates three-phase versions at 0.1–3.7 kW from single-phase versions at 0.1–0.75 kW. Reduction ratios are listed from 1:3 to 1:200. The motor rating and ratio are separate selection inputs: request the output-speed and allowable-torque table for the selected gearbox size.

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Power
0.1–3.7 kW
Product Type
Horizontal gearmotor with 1:3–1:200 ratio
Catalogue Scope
Product family / configuration confirmed on inquiry
Reduction Ratio
1:3–1:200
Three-phase Output
0.1–3.7 kW
Single-phase Output
0.1–0.75 kW
Voltage
Confirm supply
Speed
Model dependent
Manufacturer
Shanghai Zhibao

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail