IEC standard low-voltage induction motors

CATALOGUE OVERVIEW

About this motor series

VEM's Chinese catalogue describes an IEC standard low-voltage motor range covering 0.06–132 kW, with a published maximum speed of 3000 rpm. The range uses class F insulation as standard, with class H listed as an option, and includes IM B3, B35, B5, B14 and B34 mounting arrangements. These are family options rather than a single configuration. The overview also states that its low-voltage and compact motors are manufactured in Germany, a distinction to retain when contacting VEM China. Selection should begin with the shaft power, pole count, supply and mounting dimensions of the driven equipment. If inverter operation or a low-temperature installation is required, request the specific operating limits and optional build details alongside the dimensional drawing and quotation.

Model / series reference: IEC standard range

Published specifications

Use these ratings to shortlist the series. A range does not mean every combination is available.

Power

0.06–132 kW

Mounting

IM B3, B35, B5, B14, B34

Insulation

Class F; class H optional

Design Reference

IEC 60034

Manufacturing Origin

Low-voltage overview identifies German production; confirm order origin

Published Output Range

0.06–132 kW

Maximum Catalogue Speed

3000 rpm

Voltage

Confirm supply

Speed

Model dependent

Request current pricing, MOQ, lead time and a dimensioned drawing for the exact configuration offered. Catalogue drawings may cover several variants.

Catalogue reference

Manufacturer

VEM China

Product reference

IEC standard low-voltage induction motors

Source reviewed

2026-09-23

Specifications describe the manufacturer’s published catalogue. They are not a test report or a guarantee that every option can be combined.

Send a specification the manufacturer can quote

1. Application and load: describe the machine, required torque or power, speed and operating cycle.
2. Electrical supply: provide voltage, frequency, phase and any inverter or controller.
3. Installation: share mounting, shaft dimensions, frame constraints and operating environment.
4. Commercial requirements: state quantity, destination, target date and required certificates or drawings.