MOTOR MANUFACTURER · Zhejiang, CHINA

Baote Motor

Baote separates BT aluminium, horizontal cast-iron, TOP lubrication and hydraulic power-unit motors. Their pump interfaces differ, and some source sheets conflict on HP versus kW. Start with the matching drawing and request a corrected rating for that build.

LocationZhejiang, China
Published catalogue4 product series
Motor families1 represented

WENLING · HYDRAULIC AND LUBRICATION DRIVES

Zhejiang Baote: motor-to-pump interfaces before catalogue horsepower

Explore the published range ↓

01 / MECHANICAL CHOICE

Four similar catalogue labels hide different interfaces

BT aluminium: confirm the coupling face before the winding

The BT oil-pump sheet separates frame 90 and frame 100 four-pole, three-phase rows and gives different overall lengths. A distinct Y2W coupling-motor table appears lower on the same source sheet; its dimensions and ratings must not be copied into a BT order. Use the BT drawing to match the pump flange, shaft engagement and electrical build.

Confirm before ordering Send pump make/model, flange pilot and bolt circle, shaft and key dimensions, available envelope, supply, load torque, duty and thermal environment. Ask for a drawing tied to a specific BT order code and a corrected output-power unit.

View BT aluminium-housing oil-pump motor →

Horizontal iron: check frame and base loads

The horizontal cast-iron table covers several frame sizes and separates four-pole from six-pole rows, with two outline forms. A nominal frame number does not settle the pump-side connection or foot pattern. For a replacement, the installed shaft height, foot centres and coupling alignment matter as much as the electrical nameplate.

Confirm before ordering Provide the old motor and pump drawings, frame and foot centres, shaft height, bearing/coupling loads, start frequency, running torque, supply and desired protection. Request the row-specific outline and test data.

View Horizontal cast-iron oil-pump motor →

TOP lubrication pump: distinguish its two drawings

The TOP sheet presents single- and three-phase arrangements with different pump-side geometry despite a shared nominal shaft-centre height. Treat the drawings as alternative builds, not two names for one part. A lubrication pump that misaligns or runs at the wrong speed can fail even if the motor's general power class seems plausible.

Confirm before ordering State pump displacement and required pressure/flow, supply and phase, coupling style, shaft and flange drawing, oil/ambient temperature, cycle length and replacement envelope. Request the exact TOP variant and verified electrical rating.

View TOP lubrication-pump motor →

02 / EVIDENCE BOUNDARY

The page image is a configuration aid, not a complete nameplate

Resolve the horsepower/kilowatt conflict

The pump-motor images consulted here use horsepower language next to a kW-labelled power column. Converting the fraction to a neat kW value would make an unverified rating look precise. Compare candidates only after the supplier gives the order code and a corrected electrical nameplate or current data sheet with voltage, phase, current, output, speed and duty at the stated operating point.

A hydraulic power unit is an assembly question

Baote separately displays an aluminium-housing hydraulic power-unit motor, but that public entry does not provide a full orderable configuration. Confirm whether the motor includes a pump coupling, adaptor, reservoir interface, thermal protection or only the bare machine. A photograph cannot establish that any of these are supplied.

View Aluminium-housing hydraulic power-unit motor →

Keep company evidence and model approval distinct

Baote's own company page names its Wenling location and motor/pump range. A Taizhou public-list document independently names the same legal entity; a published report of a 2024 local inspection identifies one YE3-112M-4 sample as meeting that sampling exercise's checked items. Neither statement certifies the BT, TOP or horizontal oil-pump families, and an old sample result is not a current blanket approval. Request certificate numbers and the exact covered model only when needed for the purchase.

03 / DECISION READY

Make the pump-side drawing the common comparison document

What should a buyer provide?

Send the pump and present motor identifiers, flange and shaft drawings, coupling and mounting orientation, operating pressure/flow and motor torque/speed requirements, supply and starting method, duty cycle, ambient and oil temperature, enclosure requirement, required destination standard, sample quantity and expected validation date. Mark any hydraulic unit components to be included in the quote.

What should a comparable offer return?

Ask for one BT, TOP, horizontal-iron or power-unit order code and revision; a dimensioned pump-side drawing; corrected electrical rating and test conditions; permissible shaft/coupling loads; bearing and thermal design for the stated orientation; what components are included; and a sample test at the actual pump operating point. Resolve the source-sheet unit conflict before placing an order.

Published motor range

4 series

Company information

Company name
Zhejiang Baote Motor Co., Ltd
Chinese registered name
浙江葆特电机有限公司
Region
Zhejiang, China
Record updated
2026-10-08

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail