Permanent-magnet motor

Manufacturer catalogue image · Series illustration

Permanent magnet motors

Permanent-magnet motor

Product Type
Permanent-magnet motor
Cooling Option
Independent fan
Catalogue Scope
Product family / configuration confirmed on inquiry
Catalogue Families
TYE4 / TYPE4

Catalogue series · Exact configuration and availability confirmed by the manufacturer.

TYE4 and TYPE4 retrofit: synchronising the load is a different question from starting it

Chuangxin’s permanent-magnet design includes a starting cage, while the TYPE4 derivative is described for converter-fed speed control. For a retrofit, compare the required running speed and the complete acceleration process: a large locked-rotor torque does not establish that a particular load will pull into synchronism.

Three torque ratios for the 22 kW four-pole entry

The TYE4-hosted 380 V / 50 Hz table lists frame 180L-4 at 1500 rpm, 38 A, 140.1 Nm and 94.7% rated efficiency. The approximate torques below are calculated from that row’s ratios; each ratio refers to a different operating condition.

Catalogue quantityRatio to rated torqueCalculated torqueWhat it does not establish
Pull-in torque 1.2 168.1 Nm Permitted load inertia or guaranteed synchronisation time
Pull-out torque 1.8 252.2 Nm An allowable continuous overload duty
Locked-rotor torque 2.3 322.2 Nm A continuous zero-speed holding rating

Decide the retrofit around speed, starting and control

Confirm the required speed after the change

The four-pole table gives 1500 rpm at 50 Hz, rather than an induction motor’s lower loaded speed. If the old machine actually ran at 1470 rpm, the change to 1500 rpm is about 2.04%. That is an illustrative comparison, not the speed of every old motor. Check the driven fan, pump or transmission at the new operating point before claiming energy savings.

Provide the inertia and starting load

For the same 22 kW row, the locked-rotor current ratio is 10, giving about 380 A when multiplied by 38 A. Provide load inertia, torque versus speed, starts per hour and whether the machine starts loaded. Ask for the selected motor’s acceleration and pull-in assessment; a cage-starting description alone does not approve a high-inertia start.

Choose TYPE4 when the intended arrangement is a matched variable-speed drive

The TYPE4 page specifies 5–50 Hz constant-torque and 50–100 Hz constant-power bands and an optional independent fan. Specify the compatible permanent-magnet control mode, actual minimum continuous speed and load curve with the quotation. The upper constant-power band does not mean full rated torque remains available at twice base frequency.

Keep normal service and special-temperature builds separate

For ordinary operation, identify the selected winding, cooling, protection and mounting. Where smoke extraction or a hazardous atmosphere is part of the project, request the exact variant’s applicable test and approval documents with the operating conditions. The general family page does not establish those qualifications for the particular unit being quoted.

CATALOGUE OVERVIEW

About this motor series

Chuangxin’s permanent-magnet catalogue separates TYE4 from the TYPE4 inverter-fed derivative. The source describes a squirrel-cage starting arrangement within the permanent-magnet design. For TYPE4 it specifies 5–50 Hz constant-torque and 50–100 Hz constant-power operation, with an independent fan option. The catalogue also discusses smoke-extraction and flameproof variants; those application claims need variant-specific test or approval documentation.

Special-temperature and hazardous-area statements are variant dependent and are not treated as approval for every motor in the range.

Published specifications

Specifications describe a series range; confirm which ratings apply together to the quoted model.

Product Type
Permanent-magnet motor
Cooling Option
Independent fan
Catalogue Scope
Product family / configuration confirmed on inquiry
Catalogue Families
TYE4 / TYPE4
TYPE4 Constant-power Band
50–100 Hz
TYPE4 Constant-torque Band
5–50 Hz
Power
Confirm configuration
Voltage
Confirm supply
Speed
Model dependent
Manufacturer
Chuangxin Motor

Confirm mounting and shaft dimensions against the drawing for the quoted configuration.

Share with your team

Keep your sourcing team on the same page.

LinkedInFacebookXWhatsAppEmail