0
MOTOR MANUFACTURER · Beijing, CHINA
Beijing Senchuang Motion Control (SYN-TRON)
SYN-TRON publishes motors, drives and reducers as distinct parts of a motion system. Its current Chinese legal company name is 北京森创运控科技有限公司, changed from 北京和利时电机技术有限公司 in June 2026. Start with the supply, motion profile and control interface; then match the exact motor, feedback, drive and transmission rather than choosing a motor name alone.
SYN-TRON · MOTION-SYSTEM SELECTION
01 / MOTION ARCHITECTURE
The published catalogue distinguishes open-loop stepper, separate closed-loop stepper components, integrated closed-loop stepper, low-voltage servo and 220/380 V AC servo. These are different control and wiring choices, not interchangeable power ratings.
The two- and three-phase hybrid stepper families pair with separately listed SD digital or SE bus drives. Check load torque through the whole speed curve and whether the application can tolerate an unobserved missed step.
Confirm before ordering Send the required move, acceleration, duty cycle, supply and controller output; request the exact motor–driver pairing and torque-speed curve.
View Two-phase hybrid stepper motor series →The 56S and 86S motor families are listed separately from SS closed-loop drives. The 56S catalogue lists several winding/torque variants, so a family name alone does not define the chosen motor or its matching drive.
Confirm before ordering Specify shaft load, speed, encoder/feedback interface, drive model, wiring and alarm response for the exact pair.
View 56S closed-loop stepper motor series →ISS42 and ISS57 place the closed-loop stepper and electronics in one assembly. The ISS42 catalogue separates CANopen C variants from Modbus RTU over RS-485 R variants; select the actual communication variant before designing the controller interface.
Confirm before ordering Confirm bus type, address and cable plan, available 24 V DC supply, mechanical envelope and thermal environment against the selected ISS code.
View ISS42 integrated closed-loop stepper →The compact low-voltage servo family and the 220 V / 380 V AC servo families are separate published routes. Compare the application's voltage, continuous and peak torque, inertia, braking and feedback needs before picking one.
Confirm before ordering Request a motor, drive, encoder and cable set for the stated load cycle, not a motor quotation in isolation.
View Compact low-voltage servo motors →02 / POWER AND ENVELOPE
The official compact low-voltage servo table lists individual 48 V models at 200, 300, 400, 750 and 1,000 W. It also lists different body lengths; these ratings and dimensions belong to different variants and must not be combined into a fictitious single model.
SYN-TRON publishes 220 V and 380 V AC servo motor families separately. Confirm site supply and the specific drive's input, encoder or resolver option, continuous/peak load and regeneration arrangement before comparing quotations.
For a compact enclosure or mobile platform, give the motor mounting drawing, available axial length, cable exit, ambient temperature and duty cycle. Ask for the matching drive and full-length installation dimensions; a short motor body alone does not establish a compact complete system.
03 / OUTPUT-SHAFT DECISION
The manufacturer's PS/NS page distinguishes standard PS from higher-precision NS planetary reducers and publishes ratio-specific tables. It states that adapters can fit its own motors and other brands, but that is a compatibility claim to confirm with the exact flange and shaft drawing.
Give continuous and peak output torque, required output speed, radial/axial load, permitted backlash and duty. The official reducer table changes allowable values by frame and ratio; a series maximum is not a rating for every combination.
Ask for the selected reducer's motor adapter, input shaft fit, pilot, bolt circle, output shaft drawing and permitted mounting orientation. Compare these with the chosen servo or stepper's drawing before treating the pair as an assembly.
View PS/NS planetary gear reducer series →04 / PROCUREMENT RECORD
The manufacturer's June 2026 notice states that its former Chinese name 北京和利时电机技术有限公司 changed to 北京森创运控科技有限公司. A listed investor's 2026 half-year report identifies the same former and current names, while that investor's English company page uses ‘Beijing Senchuang Motion Control.’ Older English catalogue pages still show the former name; match contracts and invoices to the current Chinese registration.
Application, moving mass or load inertia, torque-speed trace, travel or positioning accuracy, acceleration, starts per hour, operating time, ambient conditions and required lifetime.
Available DC or AC supply, controller output and protocol, feedback expectations, safety stop or brake behavior, cable lengths and EMC constraints. For ISS42, explicitly identify CANopen or Modbus RTU variant rather than saying only ‘bus’.
Request full motor, drive, encoder and reducer part numbers; matched wiring, drawings and parameter files; model-specific torque-speed data; test/acceptance criteria, quantity, spare parts and delivery conditions. Compare offers on the complete motion package.
Keep your sourcing team on the same page.
We use cookies to keep this site working and measure website usage. Cookie & privacy details
LinkedIn
Facebook
X
WhatsApp
Email